1.
Study on Cutting Temperature under Ultrasonic Hard Turning 45 Hardened Steel
超声硬切削45淬硬钢的切削温度研究
2.
High-speed Processing of Dry Cutting,Hard Cutting Tool Applications Technical Analysis
高速加工中干切削、硬切削刀具的应用技术分析
3.
The cutting tool must be harder than the material to be cut.
切削刀具必须比要切削的材料硬。
4.
RELATION BETWEEN THE HARDNESS OR THE DENSITY OF WOOD AND THE CUTTING POWER IN WOOD CUTTING
木材切削中木材硬度及密度与切削功率的关系
5.
Effect of Cutting Speed and Feed Rate on UVC Hard Cutting
切削速度与进给量对UVC硬态切削加工的影响
6.
Experimental Research on Dry Cutting of Carbide Drill with Multi-facet for ZGMn13 High Manganese Steel
硬质合金群钻钻削ZGMn13高锰钢干切削实验研究
7.
Study on Cutting Force for Milling Hardened Steel Arc Path with Micro-end Mill
小直径铣刀铣削淬硬钢圆弧切削力研究
8.
A Comparison Study on Wet & Dry Cutting Hardened Steel with PCBN Cutting Tools;
PCBN刀具干湿切削淬硬钢对比研究
9.
Correct Selection of Cutting Parameters during Hard Machining with PCBN End Milling Cutters;
PCBN铣刀硬加工时切削用量的选择
10.
Research and Application on High-speed Hard and Dry Cutting with PCBN Tool
PCBN刀具高速硬态干切削的研究及应用
11.
Expansion of Notch-crack Tip in Cutting Brittle Materials
脆硬材料切削加工中的缺口裂纹扩展
12.
Researching for the micro-hardness and white-layer in the workpiece surface layer in high speed and hard cutting
高速硬态切削工件表层显微硬度与白层研究
13.
Cryogenic Finishing 45 Hardened Steel by CNC Lathe;
数控车床低温精切45淬硬钢的切削研究
14.
Study on Microscopic Mechanism of Instability in the Primary Shear Zone during High Speed Machining Hardened Steel
高速切削淬硬钢主剪切区微观失稳机理的研究
15.
EXPERIMENTAL RESEARCH OF CHIP FORMATION MECHANISM DURING HIGH SPEED MACHINING HARDENED STEEL
高速切削30CrNi3MoV淬硬钢切屑形成机理的试验研究
16.
Study of Experiment and Modeling and Control under Hard-Dry Cutting;
硬态干式切削条件下切削力实验建模与控制的研究
17.
Numerical Simulation of Dynamic Characteristics on Cutting Temperature Field and Cutting Force in High-speed Hard Machining
高速硬态切削温度场和切削力动态变化的数值模拟
18.
A is suitable for turning, milling, boring and grinding of hard metal such as heat resistant steel, high nickel steel and stainless steel.
A 极压切削液适合耐热钢、镍钢和不锈钢等高硬度材料的车削、削、孔、削等加工。