1.
Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.
斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。
2.
Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.
文摘:斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。
3.
The Principles and Application of Finish Turning Tool with Large Edge Rake Angle
大刃倾角外圆精车刀的工作原理及应用
4.
STUDY ON THE OBLIQUE CUTTING OF WOOD--The Relations Between Cutting Forces And Bevel Angles of Cutting Edge
关于木材斜角切削的研究——切削力与刃倾角的关系
5.
Calculate method of shear force is discussed on difficult obliquity in this paper.A calendar method to shear force of slanting knife-edge is put forward.
斜刃剪切时刃倾角取不同值时剪切力的计算方法不同，推导出相应的计算公式并限定了适用范围。
6.
A slanting surface or bevel on the edge of a cutting tool, such as a chisel.
刃角如凿子等刃具边缘上的斜面或斜角
7.
Helix angle30°2 Flutes,3 Flutes,4 Flutes are mainly used in the processing ordinary materials and middle-high hardness steels.
螺旋角30°刃、刃、刃以适用于加工一般材料及中高硬度钢铁材质等。
8.
SIMULATION ON THE CHIP FLOW ANGLE BASED ON THE SINGLE-POINT TOOL AND EQUIVALENT CUTTING EDGE
基于单刃刀具和等效切削刃法的流屑角仿真
9.
bit cutting angle
钻冠的尖度，钻头磨角，钎子头刃角
10.
tilting position
倾斜角(转炉)，倾斜位置
11.
ON THE KINETIC IDENTITY OF THE DIP-SLIP FAULT SLIPPING FRACTURE AND EDGE DISLOCATION
倾滑断裂、滑开破裂和刃型位错运动的一致性
12.
On Double-Edge Effects of Anti-Dumping and Countermeasures;
浅谈反倾销的“双刃剑”效应与我国的应对之策
13.
Design of Gear Shaping Cutter Chamfering Edge for Intemal Rectangular Splines
内矩形花键插齿刀倒角刃的参数设计
14.
A dagger typically having a slender square or triangular blade.
短剑一种匕首，典型特征是有一个狭长的方刃或三角刃
15.
The plane dips to the south with a dip angle of fifty-five degrees.
倾斜断面倾向南，倾角55度。
16.
Plunge is the dip of a line.
伏角：指直线的倾角。
17.
The Best Calculation Principle of Retroversion Degrees of Retroversion Osteotomy
后倾角截骨术最佳后倾角的计算原理
18.
One limb dips to the north with a dip angle of 46 degrees and the other limb dips to the south with a dip angle of 48 degrees.
其中一个翼倾向北，倾角46度，另一个翼倾向南，倾角48度。