1.
Currently the biosensor is a 25-millimeter-square plastic chip that has a meandering flow line running through it.
目前，这种生物探测仪是一个大小为25平方毫米的塑料芯片，有一个弯曲的流水线从中穿过。
2.
outdoor plasticinsulated flexible copper wire
户外用铜芯塑料软线
3.
Power Paper batteries can be used in so-called smart cards -- plastic cards that contain microprocessor chips.
纸张电池可以用于所谓的智能卡，那些带有微处理器芯片的塑料卡。
4.
Research on Hot Embossing and Bonding for Fabrication of Plastic Microfluidic Chips;
塑料微流控芯片微通道热压成形及键合工艺研究
5.
Research on Control Methods and Experiments of the Fabrication System for Plastic Microfluidic Chips;
塑料微流控芯片制造系统的控制方法和实验研究
6.
Simulation and Experiments Research on the Ultrasonic Bonding Mechanism of Microfluidic Chips;
塑料微流控芯片超声波键合机理的仿真与实验研究
7.
core of plastic insulating material, for electrical windings or bobbins
芯体,塑料绝缘材料制,绕组绕线架用
8.
ELECTROFORMING TECHNOLOGY OF INJECTION MOLD CAVITY WITH THE ORIGINAL PLASTICS PRODUCT AS MOLD CORE
用原塑料制件为模芯电铸注塑模型腔工艺
9.
Study on the Fusible Core Technique of Thermoplastic Plastics Injection Molding;
热塑性塑料注射成型中的可熔型芯技术研究
10.
a very thin transparent sheet of plastic.
一种透明的塑料薄片。
11.
stacked plastic film capacitor
叠片塑料薄膜电容器
12.
polythene-foamed sheet bag
聚乙烯泡沫塑料片袋
13.
Research on U-foam Core Material in Heat Forming Process
U型泡沫塑料芯材的热成型工艺研究
14.
Cause and Prediction of the Defects in the Process of Injection Molding for Micro-fluidic Chip
微流控芯片注塑成型质量缺陷的成因及预测
15.
THE POSSIBILITY OF TAIHU LAKE SILT APPLIED FOR SHEET MOLDING COMPOUND FILLER
太湖淤泥用作片状模塑料填料的探讨
16.
A Study of the Co extrusion of PS core Plastic Optic Fiber
聚苯乙烯芯塑料光纤共挤拉制工艺的研究
17.
Influence of the injection pressure to plastic mould core offset
注射压力对塑料模具型芯偏移量的影响
18.
Simulation and Analysis of Coupling Characteristic in Plastic Twin-Core Photonic Crystal Fibre;
塑料双芯光子晶体光纤耦合特性的模拟分析