1.
Comparative experiments were conducted to investigate the metallurgical, effects of top, bottom side and bottom argon blowing techniques.
为考察顶吹氩、侧吹氩及底吹氩的冶金效果，分别进行了三种吹氩工艺的对比试验。
2.
The experiments suggest that both bottom and bottom side argon blowing techniques provide better metallurgical effects than top blowing process, obtaining steel quality satisfactory to continuous casting requirements.
结果表明，底侧吹氩和底吹氩工艺的冶金效果均优于顶吹氩工艺，钢水质量均能满足连铸要求。
3.
Argon-blown pocket block and pocket block should be selected rationally in light of the metallurgical technology and service life of steel ladle.
吹氩座砖和水口座砖应根据冶炼工艺情况及钢包使用寿命的不同进行合理选择。
4.
LAP ARGON ARC WELDING TECHNOLOGY OF THE TITANIUM - ALLOY TUBE
钛合金管路连接件的搭接氩弧焊工艺
5.
THE NEW CRAFT OF AOD IN PRODUCTION OF MEDIUM,LOW, SIMPLEX CARBON FERROCHROMIUM
氩氧炉生产中、低、微碳铬铁的新工艺
6.
The Research on Gas Tungsten Arc Welded Magnesium Alloy AZ31 Plates;
AZ31镁合金钨极交流氩弧焊工艺的研究
7.
The Protecting Welding Craft of the Rich-argon Mixing Gas in Pressure Container;
压力容器的富氩混合气体保护焊工艺
8.
Therefore, the stain-less steel hip flask adopts argon arc welding technique, it is the initiate of home.
其中，不锈钢酒壶采用氩弧焊工艺，系国内首创。
9.
Welding Technology of Duplex Stainless Steel Air-cooler's Shoe Automatic Argon Arc Welding
双相不锈钢空冷器管头自动氩弧焊焊接工艺
10.
Clinical application of argon-arc welding in prosthodontics
氩弧焊接方法在口腔修复工艺技术中的应用
11.
Developments of top-blown copper converting technology in Houma smelter
侯马冶炼厂铜顶吹吹炼工艺的技术进展
12.
Argon-blown pocket block is a supportive new and hi-tech product developed simultaneously with bottom-blow argon vent brick.
二、吹氩座砖是与底吹氩透气砖同步开发的配套高新技术产品。
13.
Apodization Compensation of Sampled Bragg Grating Fabricated by Argon Ion Laser
氩离子倍频激光器制作取样光纤光栅的切趾补偿工艺研究
14.
Test and Research of Technology on Once Shaping and Second Shaping of Small Tube Full Amon Arc Welding
小管全氩弧焊一次成型与二次成型工艺的试验研究
15.
Microstructure and Technology of in-situ Synthesis TiCp/Ni Composite Coatings by Argon Arc Cladding
氩弧熔敷原位自生TiC增强Ni基复合涂层的显微组织及工艺
16.
PRINCIPLE OF IMPROVING KILLED STEEL QUALITY BY BLOWING Ar INTO MOLDS
钢锭模内吹氩提高镇静钢质量的原理
17.
plication of PLC Control System at the Argon Stand;
PLC控制系统在二钢吹氩站的应用
18.
In the injection stretch blow moulding process, injection moulding machine is used to make the preform.
注拉吹工艺先用注塑机注出瓶坯。