1.
tinning the ends of the wires makes a better joint when you solder them.
当你焊接接口时，用锡焊很管用。
2.
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4
3.
TFE disc valves limite to450 oF temperatures.
焊接连接端口阀门温度限制在不影响焊接连接端口的强度范围内。
4.
Flared type tube fittings--Weld male connector--Body
GB/T5642.2-1985扩口式焊接管接头体
5.
Flared type tube fittings--Weld male connector--Assembly
GB/T5642.1-1985扩口式焊接管接头
6.
When installing solder end valves, conventional soldering techniques should be used.
安装焊接连接端口的阀门时，应该采用普通焊接技术。
7.
Cell connectors and terminal post burning must be done in such a manner that there is complete fusion of the post strap top and the cover lead bushing with the connector ring or terminal post.
连接条和接线柱的焊接必须使极柱顶部和盖子的铅衬套与连接条环口或接线柱完全熔焊牢固。
8.
Applying Automatic Submerged Arc welding for Heavy Calibre Steel Pipe
埋弧自动焊在大口径钢卷管焊接上的应用
9.
Study on the Reformation of Monitoring & Conterolling System and Process for Imported AMS60 Rail Flash Butt Welding Machine;
进口AMS60闪光焊机测控系统改造及焊接工艺研究
10.
End Connections– choice of flanged, threaded or socket weld ends.
(13) 连接端口-可提供法兰、纹或焊接连接端口供用户选择。
11.
End Connections– choice of flanged or socket ends for piping flexibility.
(3) 连接端口-根据连接管道的情况，可选择法兰或承插焊连接端口。
12.
End Connections ? choice of flanged, threaded or socket weld ends.
连接端口-可提供法兰、螺纹或焊接连接端口供用户选择。
13.
creating a butt joint by welding.
通过焊接产生对接接头的焊接。
14.
The Design and Development of Interface of Welding Robot Off-Line Program System;
焊接机器人离线编程系统接口设计与开发
15.
Foot control connect terminal is convenient for welder operation.
带有脚踏控制器接口，方便焊工操作。
16.
Control of Welding Deformation in a Boiler Collector Exported to Indonesia
出口印尼锅炉方集箱焊接变形的控制
17.
Welding procedure and operating technical for T91;
T91小口径钢管的焊接工艺及操作技术
18.
Welding construction technology for installation of large diameter gas pipeline
大口径天然气管道安装焊接施工技术