1.
Screen pack
分流板(过滤网组)
2.
Analysis on the seepage monitoring data of Sanbanxi face-slab rock-fill dam
三板溪面板堆石坝渗流监测资料分析
3.
Simulation and Analysis on the Two-Phase Flow Field in Rotating-Stream-Tray Absorber by Using CFD Method;
旋流板塔内两相流场的CFD模拟与分析
4.
Original Position Statistic Distribution Analysis for Thin Slab Produced by CSP
CSP流程薄板坯原位统计分布技术分析
5.
Simulation of Moisture Separator Plate s Water Film Flowing;
波形板汽水分离器板壁水膜流动数值模拟
6.
Analysis on Internal Force in the Imbricate-Floor of Overflow Concrete Face Rockfill Dam
溢流面板堆石坝叠瓦式底板的内力分析
7.
FEM Seepage Analysis of CFRD Under Extreme Condition of Slabs Being Destroyed
面板极端破坏情况下面板坝的渗流分析
8.
PIV Analysis on Flow in the Mold during Continuous Casting of Steel Slab;
板坯连铸结晶器内熔体流动的PIV分析
9.
Experimental Study and Stable Analysis of Overfall Concrete Face Rockfill Dam;
溢流面板堆石坝试验研究与稳定分析
10.
Numerical Simulation of Flow Field in Bent Plate Stream-water Separator;
波形板汽水分离器中流场的数值模拟
11.
Analysis of Instability for Charged Liquid Jets with the Needle-plate Electrodes
针板电极荷电液体射流不稳定性分析
12.
KINETIC ANALYSIS OF THE FLOW PAST A FLAT PLATE AT MODERATE REYNOLDS NUMBERS
中等Reynolds数平板绕流的动理论分析
13.
Analysis on microstructure of rheoroll-casting semi-solid AZ91D magnesium alloy
AZ91D镁合金流变铸轧板材微观组织分析
14.
Design of a Dual-plate Differential Impact-based Yield Sensor
双板差分冲量式谷物流量传感器设计
15.
Detection of distributor dead-zone in gas-solid fluidized bed by acoustic emission method
气固流化床分布板死区的声发射检测
16.
Wanding of the Flow Baffle Plate(FBP) of Steam Generator
蒸汽发生器流量分配板(FBP)通杆测试
17.
Boundary Layer Analysis of Slice Section of Headbox and the Design of Edge Flow Pipe
流浆箱唇板区边界层分析及边流管设计
18.
Numerical Analyses of the Flow in the Parallel Plate Flow Chamber and Carotid Bifurcation;
平行平板流动腔、颈动脉分岔处流场的数值研究