1.
Information Extraction from Data of Structural Health Monitoring System: Estimating Passage Load by Monitoring Values of Deflection and Strain
健康监测系统数据的信息提取——利用挠度和应变监测值估算通行荷载重量
2.
flexural strain
挠曲应变,弯曲应变
3.
Find the value of the bending stress and the deflection at the center if the ribs are omitted.
如果略去肋条，求中心处的弯曲应力和挠度之值。
4.
Application of stress and flexibility measurement in estimating of loading capacity for steel structure operating platform
应变及挠度测量在钢结构操作平台承载评估中的应用
5.
Grey System Theory and Its Applications in Construction Flexibility Deformation Monitoring of Concrete Bridge;
灰色系统理论及在混凝土桥梁施工挠度变形监测中的应用
6.
Experimental study on creep deformation of fold-line pre-tension pre-stressed simple supported beam
折线先张预应力混凝土简支梁徐变挠度试验研究
7.
Deflection Calculation and Construction Control of Long-Span Prestressed Concrete Continuous Rigid Frame Bridges;
大跨度预应力混凝土连续刚构桥挠度计算和施工控制
8.
Some important parameters which incluence the period of deformation, the final deflection of the beam and the distribution of disspated energy are discussed.
讨论了一些主要参数对变形时间、终挠度和耗散能分配的影响.
9.
The Simplified Formula for Calculating the Deflection of Steel-concrete Composite Beams and the Distortional Stability Analysis of Its Negative Moment Zone;
钢—混凝土组合梁挠度计算简化方法和负弯矩区的畸变屈曲分析
10.
Incorporate Modeling and Simulation of Transfer Alignment with Flexure of Carrier and Lever-arm Effect
传递对准中载舰挠曲变形和杆臂效应一体化建模与仿真
11.
VARIATIONS OF CURVATURE,TORSION AND STRESS OF DOUBLE HELIX WIRE IN 6×7+IWS WIRE ROPE
6×7+IWS双螺旋钢丝曲率和挠率及其应力变化特性
12.
Finite Element Analysis of Deflection Deformation of RC Beam Strengthened With CFRP
CFRP加固RC梁挠度变形的有限元分析
13.
The tube tower is subject to the stand tall, light structure, to which small deformation and great displacement occur easily under the action of the external load. So it is necessary to calculate the strength and deflection of the tube tower.
但管塔属高耸轻型结构 ,在外载作用下 ,易发生小变形大位移 ,必须计算管塔强度和挠度。
14.
This paper presents the key points to the design of these two types of masts and provides the permissible stress and deflection range that should be satisfied in design calculation of a specific application.
文中论述其设计要点，为适应工作条件，在设计计算中应满足相应的许用应力和挠度允许范围等。
15.
Development and Application of Surface Deflection Auto-measuring Equipment
面板挠度自动测量装置的研制及应用
16.
PARAMETRIC ANALYSIS OF MID-SPAN DEFLECTION OF PRE-STRESSED STRENGTHENING RC BEAMS WITH HFRP
预应力HFRP混杂加固RC梁跨中挠度分析
17.
The Calculation Equation for Four-edged Rectangular Plates with Work Reciprocal Theorem of Bending Thin Plates with Large Deflections;
应用大挠度薄板功的互等定理求解四边固定矩形板的挠曲方程
18.
Study on Deflection and Stiffness of Simply Supported Prestressed Concrete Beams;
预应力混凝土简支梁的挠度与刚度研究