1.
Optimal Design of the Main Bolt of Top Cover of the Ammonia Converter Based on ANSYS
基于ANSYS对氨合成塔端盖主螺栓的优化设计
2.
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"
3.
Fatigue is the main rupture mode of bolt.
疲劳破坏是螺栓失效的主要形式之一。
4.
Analysis of bolt fracture failure for high-pressure main stop valve of turbine
汽轮机高压主汽门螺栓断裂失效分析
5.
double-screw bolt
螺柱，双头螺纹螺栓
6.
The rear axle is stationary, and is bolted rigidly to the main frame.
后轴是固定的，用螺栓刚性固定在主机架上。
7.
Reliability of Analysis of the Primary Cylinder s Bolt Joint in Flange of the Hydraulic Press;
液压机主工作缸法兰处螺栓联接的可靠性分析
8.
Study on the Fracture of the Anchor Bolt and the Vibration of the Ship s Main Engine;
某轮柴油主机振动与地脚螺栓断裂研究
9.
draw-bar carrier bolt
牵引杆托(板)螺栓
10.
a safety harness, bolt
安全带、 保险螺栓.
11.
stressed collar
剪力环（螺栓联接）
12.
brass bolts and nuts with round head
黄铜圆头螺栓和螺母
13.
Mounting Bolts (Screws)—IAC Motor
固定螺栓（螺丝）—IAC马达。
14.
LDP Pump Bracket Nuts/Bolts
LDP泵支架螺帽/螺栓
15.
follower stud and unt
从动板柱螺栓及螺母
16.
Mechanical property requirements for studs shall be the same as those for bolts.
柱头螺栓的机械性能要求与螺栓相同。
17.
Loosen oil pan bolts and remove the front bolt at each side.
松动油底壳螺栓，拆下每一面的前螺栓。
18.
Install connecting rod bolt protectors on rod bolts.
在连杆螺栓上安装连杆螺栓保护件。