1.
Study on "Excess Heat" Triggered by Pressrue and Laser in a Hydrogen-Palladium Gas-Loading System;
充氢率、压力和激光对H-Pd气固系统“过热”触发的研究
2.
Research on Gas-solid Two-phase Flow in Pneumatic Conveying System;
气力输送系统中出料阀内气固两相流动的研究
3.
THE CORE/ANNULAR INTERNAL RECIRCULATION FLOW STRUCTURE MODEL FOR GAS-SOLIDS COCURRENT UPFLOW SYSTEM
气－固并流上行系统的环／核内循环流动结构模型
4.
The fixed gas detection system with automatic self test.
具有自我自动校正功能的固定式气体侦测系统.
5.
Two-phase Simulation of Gaseous Pollutants Removal by the Thief-Process Produced Activated Carbon;
分流活性炭综合脱除系统的气固两相流场研究
6.
Thermodynamics Simulation of Preheating-precalcining Whole Kiln System with High Solid-gas Ratio;
高固气比预热预分解全窑系统热力学仿真研究
7.
The Design and Performance Test Research on the Fixed-bed Stalk Gasification System;
固定床秸秆气化系统的设计与性能试验研究
8.
Access for Normal Pressure Fixed-bed Coal Gasifier to Expand Production Capacity and Reduce Cost
常压固定床间歇煤气炉系统增产降耗分析
9.
Continuous Monitoring System for Mercury Emissions from Flue Gas of Stationary Sources
固定污染源烟气中汞排放连续监测系统
10.
The designing of 6.0MPa electric actuator cylinder head valve for CO_2 fixed extinguishing system
CO_2固定式灭火系统6.0MPa电动气瓶阀的设计
11.
Application of HPF method in tamping coke oven gas system
HPF法脱硫工艺在捣固焦炉气脱硫系统中的应用
12.
The curative agent system is completely closed and airproof.
涂胶机固化剂系统，为全封闭系统，杜绝了空气的混入。
13.
A Cold Model Experimental Research on the Tri-series Cyclone Preheater with High Solid-gas Ratio;
三系列高固气比旋风预热器系统的冷模试验研究
14.
In automatic switching,an assemblage of fixed contacts used to establish electrical connections.
自动交换系统中一些固定结点的组合,用来建立电气连接。
15.
The Design and Research of Pneumatic System for Blown Sand Control Straw Checkerboard Barriers Paving Robot;
防风固沙草方格铺设机器人气动系统的设计与研究
16.
Design of Surface Charge Test and Measurement System of Insulator at Gas-Solid Interface;
气—固交界面处绝缘子表面电荷试验与测量系统的设计
17.
system of fast and loose pulleys
固定轮及游滑轮系统
18.
fixed fire alarm system
固定式失火报警系统