1.
Study on Panel Adjustment Method and Meas.-Adjusting Software Development for Large Reflector Antenna;
大型反射面天线面板调整方法研究和测调软件开发
2.
Take care to square up accurately the boards to form the front, back, and sides.
注意要准确地调整正面，背面和侧面的板。
3.
link adjustment
联杆调整月牙板调整
4.
"(Use Mouse Properties in Control Panel to adjust pointer speed.)
"(用“控制面板”中的“鼠标属性”来调整指针速度。)
5.
Fixed a problem where it was difficult to resize the grouping panel using the lower-right corner.
修正了分组面板难以在右下角调整的问题（??!!）
6.
All floor-mounted cabinets are supported on four leveling screws that are adjustable from access in toe base.
所有地面安装式柜体均由4个可调螺丝支撑，由踢脚板开口处调整螺母以调节台面水平。
7.
To balance(an aircraft) in flight by regulating the control surfaces and tabs.
使配平通过调整飞机的操纵面和阻力板使（飞机）在飞行中保持平稳
8.
Intra-Industry Trade and Trade-Induced Cost--Empirical Analysis Based on China's Manufacture Industry
产业内贸易与贸易调整成本——基于中国制造业面板数据的经验分析
9.
Design and Adjustment of Collapsing Plates and Gussets of Extrusion Lines for Blown-films
塑料吹膜机人字板、插板的设计与调整
10.
Central Nip Gap Adjustment with Digital Electronic Nip Gap instrument on the Control Panel for readouts in increments of 0,1 mm.
中央夹紧调整通过控制面板上的数字显示控制装置实现，显示调节间隔0.1毫米。
11.
justable round split die with adjusting screw
带调整螺钉的可调式圆板牙
12.
rear-controlled zoom lens
背面调整变焦距透镜
13.
Focus: adjusts picture sharpness
聚集：调整画面清晰度
14.
Inflect the interface for typical navigation.
为常见的导航调整界面。
15.
Convert some Storage Memory to Program Memory. (You can use the System control panel to adjust memory later.)
将一些存储内存转换为程序内存。（以后还可用“系统”控制面板来调整内存。）
16.
To correct your clock settings, click the Adjust Clock button to launch the Date and Time Control Panel.
若要更正时钟设置，请单击“调整时钟”按钮以启动“控制面板”的“日期和时间”。
17.
For consistency, before carrying out the tuning tips suggested below, switch to classic view in the control panel as well as for the start menu.
在开始进行下列调整前，请把“开始”菜单和“控制面板”都恢复到正常设置。
18.
Efficiency appraising study about Chinese manufacturing structure changing in the condition of economy ppening;
经济开放条件下中国制造业结构调整的绩效评价研究——基于面板数据的实证分析