1.
motion work for clocks or watches
钟表的辅助装置齿轮组
2.
In the schematic diagram (fig.9), gears C, E, G, and K are sliding gears.
如图9所示，齿轮组C,E,g及K是变速齿轮组。
3.
These four pinions act as bridges between the side gears.
这四组小齿轮起到连接侧方齿轮组的桥梁作用。
4.
When none of the sliding gears is in mesh with its countershaft gear, the gears are said to be in“ neutral.
如果没有变速齿轮组与副传动轴上的齿轮啮合，这时，就叫做空挡。
5.
silent third and fourth gearset
无声三速和四速传动齿轮组
6.
The Design Principle of Moving Back and Forth Intermittent Mechanism With Geneva Wheel and Gear Composed
槽轮-齿轮组合往复式间歇运动机构的设计原理
7.
The integral type housing, hypoid gear design has the centerline of the pinion set above the centerline of the ring gear.
集成型的差速室、准双曲面齿轮的设计中，小齿轮组中心线在环形齿轮的中心线之上。
8.
geared turbogenerator
齿轮传动涡轮发电机组
9.
straight-cut gear
直齿圆柱齿轮，正齿齿轮
10.
burnishing of gear teeth
(齿轮的) 轮齿研磨
11.
spur and helical hobbing machine
正齿轮和斜齿轮滚齿机
12.
Input a revolution to the handle to drive the helical gear set to rotate another rotation system.
手把输入旋转运动于转轮，转动小齿轮和大齿轮。由小齿轮转动另一组的转动系统。
13.
increment angle
(圆锥齿轮)齿端角
14.
It consists of a car-riage, a rotary gear reducer and a hoist gear reducer.
它由一个滑架、个转动齿轮减速器和一个提升齿轮减速器组成。
15.
In this paper, a gears 5 bar linkage is gained by adding Assur groups on the mechanism of eccentric involutes gears.
在偏心渐开线齿轮机构上附加Ⅱ级杆组 ,得到齿轮五杆机构。
16.
The Study of the Cold Forging Mold Life and the Influencing to the Coarse Grained Organization Factors of the Gear
齿轮冷锻模具寿命和影响齿轮粗晶组织因素的研究
17.
Defective solenoid pack (UD pressure in 4th gear)
有缺陷的电磁组（ＵＤ压力在第四个齿轮）
18.
A set of gears needs periodic alignment.
一组需要定时调整的齿轮