1.
On Note Position of Reference in Main Body and its Function of the Relevant Punctuation;
参考文献在正文中的标注位置及其与相关标点符号的关系
2.
a corner of a page turned down to mark your place.
书页里折起来标注阅读位置的页角。
3.
Fill/Drain Plug And Tag Locations
注油塞/放油塞和标记位置
4.
Mark location of the holes for the opposite leg and drill three more holes.
标注出对面支柱的孔洞位置,并打钻出三个孔。
5.
Formats the selected callouts or sets callout defaults
设置选定标注格式或设定标注默认值
6.
N places the filename under the cursor into the command line.
将在命令行的相应位置用光标所在位置的文件名（注：这里的意思是源窗口）替代。
7.
charted position
位置图(船位标在图上
8.
Callout with outline box and adjustable pointer at top or bottom of text block. Pointer position controls text alignment.
位于文本块顶部或底部带外框和可调指针的标注。指针位置可控制文本的对齐方式。
9.
B: A sketch must be easy to understand, and clearly indicate the position of seams, pockets, darts, type of collars, width of sleeve, etc.
图纸必需简洁明了，要清楚地标注出拼接和缝和的位置，以及袋位，领型袖宽等参数。
10.
position function
位置函数，坐标函数
11.
Plant positions should be marked out.
应标明出栽植位置。
12.
a line indicating the location of the start of a race.
标明比赛开始位置的线。
13.
Crankshaft Journal Size Paint Location
曲轴颈部尺寸标记位置
14.
4 PLCS MARKED "H"
标记有'H'的4个位置
15.
buoy submerged rocks
用浮标指示暗礁位置.
16.
Mark Buttonhole & Button Position
标出钮门与钮扣的位置
17.
The Standards and formats setting is set to %1, and the location is set to %2.
标准和格式设置被设置为 %1，设置位置为 %2。
18.
Roofs and floors are concreted on the ground, lifted into position with the aid of jacks, and secured to columns at specified elevations.
房盖和楼板都在地面浇注，用千斤顶升到指定的位置，并按规定标高固定在柱子上。