说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 温度设置
1.
Thermostats - Immersion type for accurate temperature control from positive off up to 180oC.
温控器--浸泡式温控器用于温度的精确控制,温度设置范围在0~82oC。
2.
"Before any work is done on the heater, disconnect all power to the heater by opening the switch at the main electrical circuit breaker of fuse box."
在调节温度控制器的温度设置之前,请首先关闭电源开关,切断电源。
3.
Temperature probe warning threshold( s) set successfully.
(温度探测器警告阈值已成功设置。
4.
Temperature probe warning threshold value(s) set successfully.
(温度探测器警告阈值已成功设置。)
5.
Continue on with our cake baking... Preheat Oven to175℃.
继续做蛋糕...烤箱设置温度到175℃预热。
6.
The Design of The Tenperature Control System in The F22Production Equipment;
F22生产装置温度控制系统的设计
7.
Design of the temperature self-control of the truck skid system
货车刹车系统温度自动控制装置设计
8.
The Design on the Temperature Measurement Device Based on DS18B20
基于DS18B20的温度测量装置的设计
9.
additional manual reset hi limit - requires heater to be manually reset upon over-temperature condition.
附加人工预置高温限制---用于人工设置热水器的最高温度限制。
10.
Most cylinders are designed to vent contents when exposed to elevated temperatures.
大多数钢瓶设计了温度升高时的泄压装置。
11.
Design and Achievement of the Multple-channeled Temperature and Pressure Test Devices
多通道温度、压力检测装置的设计与实现
12.
Design of Real-Time Temperature Measuring Device of Gun Charge Based on Single Chip Computer;
基于单片机的火炮装药温度实时测量装置设计
13.
Simulation Analysis of the Thermal Stress Field of RCC Arch Dam with Induced Crack;
设置诱导缝的碾压混凝土拱坝温度应力场仿真
14.
The Design and Development of the Terminal Unit of Temperature Monitoring System for Underground Cable Junctions;
电缆接头温度监测系统终端装置的设计与实现
15.
The Design of Temperature and Positioning Control System for Perforator Target Device
射孔器打靶检测装置温度及定位控制系统设计
16.
Design and Development on Monitoring Device of Temperature Field in Laser Molten Pool
激光熔池温度场监测装置的设计与研制
17.
The Design of Temperature Control System Based on the PIC Chip
一种基于PIC16F877的温度显示报警装置的设计与实现
18.
Discussion on layout of temperature slots of the main power building longitudinal frame with 1000MW units
1000MW机组主厂房结构纵向温度伸缩缝设置的探讨