说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 脱铝方法
1.
EFFECT OF DEALUMINATION METHOD ON THE PHYSICO-CHEMICAL PROPERTIES OF NANOSCALE HZSM-5
脱铝方法对纳米HZSM-5物化性能的影响
2.
DESULFURIZATION BY Al-Ca DOUBLE ALKALI
铝钙双碱法脱除钼焙烧烟气二氧化硫
3.
Method for spectrographic analysis of aluminium and its alloys
GB/T5871-1986铝及铝合金摄谱光谱分析方法
4.
Aluminium and aluminium alloys--Compression test method for tubes
GB/T3251-1982铝及铝合金管材压缩试验方法
5.
The Research of CuO/Al_2O_3 Catalyst-sorbents Desulfurization of Flue Gas and Regeneration;
铝基铜吸附剂干法烟气脱硫及再生研究
6.
Study on the Desilication of Raw Liquid in Sintering Process Alumina Production;
烧结法氧化铝生产粗液脱硅新工艺研究
7.
The Research of Desulfurization in the Course of Producing Alumina in the Lime Bayer Process and Thermodynamics
石灰拜耳法生产氧化铝脱硫及其热力学研究
8.
Study on the dealkalization of red mud by suspension and carbonation
铝业碱性赤泥的悬浮碳化法脱碱工艺研究
9.
TEST RESEARCH ON DECHLORINATION OF EVAPORATION MOTHER LIQUOR BYELECTROCATALYSIS
铝酸钠蒸发母液的电解催化法脱氯研究
10.
Pilot Test of Sulfoaluminate Cement Production Using the Semi-dry Desulfurization Residues
半干法脱硫灰烧制硫铝酸盐水泥的中试试验
11.
Chemical analysis of aluminium powder--Determination of total aluminium by difference
GB/T3169.2-1982铝粉化学分析方法减杂质法测定总铝量
12.
Use waste vitriol、 quadratic aluminum dust as stuff to produce alumina for printing ink was described in this paper.
本法是以含铝废硫酸、次铝灰为原料生产油墨用氧化铝的方法。
13.
Standard method for direct reading spectrometric analysis of aluminum and its alloys
GB/T7999-1987铝及铝合金的光电光谱分析方法
14.
Aluminium and aluminium alloys--Shear test method for rivet wire and rivets
GB/T3252-1982铝及铝合金铆钉线与铆钉剪切试验方法
15.
Aluminium and aluminium alloys--Riveting test method for rivet wire
GB/T3250-1982铝及铝合金铆钉线铆接试验方法
16.
Aluminum and aluminum alloy--Cold drawn thin-wall tubes--Eddy current inspection method
GB/T5126-1985铝及铝合金冷拉薄壁管材涡流探伤方法
17.
Methods of sampling for analysing the chemical composition of wrought aluminum and aluminum alloy
GB/T17432-1998变形铝及铝合金化学成分分析取样方法
18.
Investigation of Arc-sprayed Aluminium Coating on 6061 Al Alloy and Its Sealing Treatments
铝合金电弧喷涂纯铝涂层及封孔方法研究