1.
Dynamic Numerical Simulation for the Mechanism of V-shaped Notch Blasting
V形刻槽爆破机理动态数值模拟分析
2.
A TEST AND RESEARCH ON UNLOADING BY BLASTING IN COAL SEAM 2 IN MEN TOU GOU COLLIERY
门头沟煤矿二槽煤爆破卸截试验研究
3.
Study of Method of Conducting Smooth Blasting in Weak and Soft Surrounding Rocks
软弱围岩中光面爆破掏槽孔方案研究
4.
DESIGN AND CONSTRUCTION OF A LARGE IRRIGATION AQUEDUCT BRIDGE′S BLASTING DEMOLITION
一大型水利渡槽爆破拆除设计与施工
5.
DEMOLITION OF ALUMINA STORAGE BY DIRECTIONAL BLASTING IN COMPLICATED ENVIRONMENT
复杂环境下氧化铝储槽定向爆破拆除
6.
Blast-cutting of the Gate Slot of Huangling Water Gate in Wuhan for Slot Widening and Monitoring of Blasting Vibration
武汉黄陵闸闸门槽扩宽爆破切割与爆破振动监控
7.
The loosening holes outside the plough cut are also drilled at an angle which improves the breakage possibility.
在楔形掏槽眼外侧的扩槽眼也要有角度以改善爆破效果。
8.
The Norwegian cut can provide more dependable advance per round than the plough cut.
挪威掏槽与楔形掏槽相比，可以提供更可靠的每次爆破的进度。
9.
Numerical Simulation Research of Charging Optimization in Spiral Cutting Blasting in Medium Deep Bore
中深孔掏槽爆破装药优化的数值模拟研究
10.
Application of cut blasting in trench digging technique in the middle of the stope
掏槽爆破在采场中部掘沟工艺中的应用
11.
ENGINEERING PRACTICE AND NUMERICAL SIMULATION ON THE MILLISECOND BLASTING FOR DITCHING DEEP BORE HOLES
沟槽深孔微差爆破的工程实践和数值模拟
12.
Study on the Failed Mechanism and Experiment of Spiral Notch-holes Blasting;
螺旋切槽孔松动爆破力学机理及试验研究
13.
Study on the Mechanism of Notched Directional Splitting Controlled Blasting by Dynamic Photoelastic Method;
切槽定向断裂控制爆破机理的动光弹研究
14.
The kibble hole arrangement optimization of tunnel digging blasting of Daanshan mine
大安山矿巷道掘进爆破掏槽孔布孔优化
15.
Discussion About Blasting Footage and Cutting Patterns of Circular Tunnel in Supper Hard Rock
圆型隧洞超硬岩爆破进尺与掏槽方式探讨
16.
Experimental investigation on dynamic mechanical behaviors of cracks induced by V-notch borehole blasting with dynamic caustics
切槽孔爆破动态力学特征的动焦散线实验
17.
Vibration Testing and Control of Underwater Reef Blasting
水下基槽炸礁工程爆破振动的削减和监测
18.
Popularization and Application of Deep-hole Blasting Technique in Bottom Compound-term Wedge Cutting
底部复式楔形掏槽中深孔爆破技术的推广应用