1.
A Study of a Finite Element Model for a Gas Turbine Tie-rod Rotor and its Critical Speed Calculation
燃气轮机拉杆转子有限元模型研究及临界转速计算
2.
steering drag link rear end grease fitting
转向纵拉杆后端油嘴
3.
steering knuckle tie rod end pressure lubricator
转向节横拉杆接头油嘴
4.
The handle inputs rotation upon the link rotated.
手把输入旋转运动于连杆，使杆子转动。
5.
Install steering damper onto the axle bracket and drag link.
安装转向阻尼器至轴支架和转向拉杆。
6.
Tie Rod End To Steering Knuckle Nut
转向拉杆端与转向关节螺栓
7.
steering knuckle tie rod end assy
转向关节横拉杆接头总成; 转向节横拉杆接头总成
8.
The pole swung in an arc.
杆子转了一个弧形。
9.
Torquing Tie Rod End Attaching Nut
拧紧转向拉杆端接合螺帽
10.
a center-pivoted lever, especially to push a valve down in an internal-combustion engine.
一种回转杆，尤其是用于内燃机中拉闸。
11.
Remove cotter pins and nuts from drag link
从转向拉杆上拆下开口销和螺母。
12.
To brace(a yard)fore and aft.
使船转向向首尾拉紧（横桅杆）
13.
Tie Rod End Adjusting Sleeve Nut
转向拉杆端调整轴筒螺栓
14.
The Development of Motor Steering Link and Bar Test Bench
汽车转向拉杆接头总成试验台的开发
15.
Remove the cotter pin and nut from the drag link at the pitman arm.
从转向拉杆上拆下转向摇臂处的开口销和螺母。
16.
"This movement causes the pitman arm, attached to the sector, to swing to the right or left. This action, in turn, pushes or pulls on the tie rods attached to the pitman arm."
这一运动又依次推动或拉动与转向摇臂相连的转向直拉杆。
17.
You hoist a flag when you pull it to the top of its pole.
升旗，就是把旗子拉到旗杆的顶上。
18.
Model and fatigue life analysis for screw rotor of single screw compressor
单螺杆压缩机螺杆转子模态与疲劳分析