1.
Reason anylisis and countermeasures of crack in cylinder head for 240D diesel engine
240D型气缸盖裂纹原因分析及改进方案
2.
Reason analysis and prevention measures of cracks of cylinder heads for diesel engines of DF_7 locomotives
东风_7型机车柴油机气缸盖裂纹原因分析及预防措施
3.
Analysis of Cracks Formation on the φ2500 Cast-iron Dryer Cover
φ2500铸铁烘缸端盖裂纹成因分析
4.
Crack Reason Analysis and Improvement of Cylinder Liner Supporting Shoulder
气缸套支承肩产生裂纹的原因分析及防止措施
5.
Reasons for Cracks in Cylinder Liner of Engine for Driving Water Pump for Blowing Sand
驱动吹沙水泵柴油机气缸套裂纹损伤原因分析
6.
Reason analysis and improvement measures of cracks of cylinder heads for DF_4 locomotive diesel engines
东风_4型机车柴油机气缸盖开裂原因分析和改进措施
7.
The water in the jar has seeped away through a crack into.
缸里的水通过上面的裂纹都已漏掉了。
8.
Analysis on Fatigue Cracking of Cylinder Cap Bolt
缸盖螺栓接触损伤引发疲劳开裂分析
9.
Like the cylinder block, the head is made from either cast iron or aluminum alloy.
像气缸体一样，气缸盖是由铸铁或者铝合金制成。
10.
The cylinder head is attached to the block with high-tensile steel studs.
气缸盖与气缸体用高强度的钢螺栓缚连结。
11.
The Numerical Simulation of Flow and Temperature Field in Cylinder Head of Diesel Engine with Small Cylinder Bore;
小缸径柴油机气缸盖流场、温度场的数值模拟
12.
Install cylinder head, intake manifold, and exhaust manifold, refer to cylinder head installation in this section.
安装汽缸盖，进气歧管和排气管，请参阅本部分的汽缸盖安装。
13.
"In the other kind of valve mechanism for an engine, the valves are located in the cylinder Block instead of the head."
另一种气门机构的气门是装在气缸体上,而不是装在气缸盖上。
14.
A Case Analysis and Research on the Cylinder and Piston Crack of Ship s Main Engine;
某轮柴油主机缸套及活塞裂纹分析研究
15.
Study on Optimized for Welding Process of the Crack in High-pressured Cylinder of Steam Turbine
汽轮机高压缸体裂纹焊补工艺优化研究
16.
having both inlet and exhaust valves located in the cylinder head.
在气缸盖上有出口和入口。
17.
"The cylinder head is usually cast in one piece from iron, from iron alloyed with other metals, or from aluminum alloy."
气缸盖通常由铁、铁合金或铝合金铸成。
18.
Research on 4G1 Cylinder Cover Workability by Low Pressure Casting;
低压铸造4G1气缸盖加工性能的研究