1.
Bending of the Carbon-Epoxy 45°Symmetric Angle-Ply Laminates
![点击朗读](/dictall/images/read.gif)
碳/环氧对称45°斜交铺层层合板的弯曲
2.
unprotected cut slope
![点击朗读](/dictall/images/read.gif)
未铺置保护层的削土斜坡
3.
an oblique fault is one that strikes obliquely or diagonally to the strike of the adjacent rocks.
斜向断层是指断层走向与围岩走向斜交的断层。
4.
The Research of Inclined-Layer Placing Effect on the Thermal Field and the Thermal Stress of the RCC Gravity Dam;
斜层铺筑对碾压混凝土重力坝温度场及温度应力的影响研究
5.
all-paved branch
![点击朗读](/dictall/images/read.gif)
全铺分支, 全铺锐角交叉
6.
Improvement of Structure Lateral Rigidity by Crossing Inclined Support
![点击朗读](/dictall/images/read.gif)
交叉斜撑法应用于改善结构楼层侧向刚度
7.
If the strike of a fault is perpendicular or diagonal to the trend of regional structures, it is refer to transverse fault.
如果断层走向与区域构造线走向相垂直或斜交,则称之为横向断层。
8.
A Research on the Fatigue Damage of AsPhalt Overly on Old Cement Pavement under Traffie Load;
交通荷载下旧水泥混凝土路面沥青加铺层结构的疲劳性能研究
9.
The Bending of Rectangular Angle-ply Laminated Orthotropic Plates with Four Free Edges on the Elastic Foundation;
弹性地基上四边自由正交异性反对称角铺设层合矩形板的弯曲
10.
The Design Technique of Heavy-traffic Cement Concrete Pavement Paving Bitumen Layer
![点击朗读](/dictall/images/read.gif)
浅谈重交通水泥混凝土路面加铺沥青层设计技术
11.
an inclined fault in which the hanging wall appears to have slipped down relative to the footwall.
上层相对于底层倾斜的倾斜断层。
12.
Effects of related factors on lateral resistance of high-rise diagrid tubular structures
![点击朗读](/dictall/images/read.gif)
高层斜交网筒结构体系抗侧性能相关影响因素分析
13.
Application of anti-fatigue agent PL-600 in inner carcass plycompound of 23.5-25 OTR bias tire
抗疲劳剂PL-600在23.5-25工程机械斜交轮胎内层帘布胶中的应用
14.
diagonal pattern
![点击朗读](/dictall/images/read.gif)
斜纹图案,斜纹花型,斜交式图案
15.
The ground was lightly powdered with snow.
![点击朗读](/dictall/images/read.gif)
地上薄薄地铺了一层雪。
16.
Snow lies thick on the fields.
![点击朗读](/dictall/images/read.gif)
田野里铺着厚厚一层雪。
17.
The numerical illustrations concern the postbuckling behavior of perfect and imperfect, cross-ply laminated cylindrical shells under different sets of environmental conditions.
数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为。
18.
The framework and the lee-board, if any, of a berth shall be ofapproved material, hard, s mooth, and not likely to corrode or to harbourvermin.
铺位不应以并排的方式放置,即只有超过一个铺位才能到另一个铺位。铺位的层数不应超过两层;