1.
The Positive Cone and Semi-order Yielded by the Bounded Linear Functional in Banach Spaces;
Banach空间上非零有界线性泛函导出的正锥与半序
2.
The ortho cone helicoid was used interrsect intercept by the ortho cone helicoid and the cylinder.
正圆锥螺旋面是正圆柱螺旋面被同轴正圆锥面截得。
3.
Elevation view of a tapered key with optional gib head.
具有可选钩头的锥形键的正视图。
4.
CAD for the Evolve Drawing of Two-elbow with Positive Cone
正圆锥两节渐缩径弯头展开图cad
5.
Motion perception of cone cells in normal Chinese population
国人锥细胞运动觉的正常值特征(英文)
6.
Query on Guan Zhui Bian·Mao Shi Zheng Yi·Guan Ju(4);
读《管锥编·毛诗正义·关雎(四)》献疑
7.
Katsevich Correction and Rectification Algorithm for Off-center Spiral Cone-beam CT
偏心螺旋锥束CT的Katsevich修正重建算法
8.
Any cone is a third part of the cylinder which has the same base with it and equal height.
任一（正）圆锥是与其同底等高圆柱的三分之一。
9.
Research on the NC Machining and Error Correcting Technology for Spiral Bevel and Hypoid Gears;
螺旋锥齿轮数控加工与误差修正技术研究
10.
Tooth Contact Analysis and Cutting Parameters Modification of Small-modulus Spiral Bevel Gears;
小模数弧齿锥齿轮的接触分析与切削参数修正
11.
Analyzing the Characteristics of Natural Vibration of Square Pyramid Space Grids under Different Support Forms;
不同支承形式正放四角锥网架自振特性分析
12.
An Accurate Solution of the Furthest Right Point of the Pro-cut Line of Taper & Column;
圆锥、圆柱正交相贯线最右点的准确求法
13.
Typical modes of Rupture of Thin Metal Circle Plates under Normal Impact of Different Conical-Nosed Missiles--Experiments;
薄金属圆板在圆锥头弹体正冲击下的破裂模式
14.
Some Conclusions on the Sectional Area of the Cubic Circumscribed Cone of the Same Class;
正方体外接圆锥一类截面面积的几个结论
15.
Research on Generation Mechanism and Correction Technique for Spiral Bevel Gear's Grinding Errors
螺旋锥齿轮磨削误差产生机制及修正技术研究
16.
Experiment Research on the Simulative Pressure for Cushion Preselecting of Final Driving Gear Assembly
汽车主锥总成测量选垫模拟正压力优化试验
17.
Scatter Correction Method for Flat-Panel Detector-Based Cone Beam CT
基于平板探测器的锥束CT散射校正方法
18.
Edge drop control using sinusoidal tapered work roll on a UCMW mill
UCMW轧机正弦函数形单锥度工作辊边降控制