1.
Effect of heat treatment on Ni-P coating strength under vibration wearing condition
热处理对振动磨损条件下Ni-P化学镀层结合强度的影响
2.
The adhesive strength of the acid film was stronger than that of the alkali film.
碱性镀层的结合强度优越于酸性镀层。
3.
It was proved thet the pooperties of the bath is stable,the deplsition rate is considerably high,the edposited layer possess fairly high hardness and good adhesive power to the substrate.
试验结果表明:镀液性能稳定,镀层沉积速度快,镀层硬度高、质量好、结合强度大。
4.
The elec-troplating layer of the products electroplated by our company is has strong combination, fine nui-formity and high consistency.
由我公司电镀的产品镀层结合力强，均匀度好，致密度高。
5.
With increasing the heat-treatment temperature, the adhesive strength and corrosion resistance of the films declined.
热处理温度进一步增加，镀层的结合强度下降，耐蚀性变化不大。
6.
The coating possesses extensibility and higher adhesive strength with substrate, and the bath is stable and reliable.
本工艺镀液稳定可靠，获得的镀锡层延展性能好，与基体结合力强。
7.
Study on Properties of Electroless Nickel Plating Coating on High-Strength Aluminum Alloy
高强铝合金的化学镀镍镀层性能研究
8.
Research on Interface Bonding Strength of Copper Electroplating Film and Oxidation Performance
电镀铜薄膜界面结合强度及氧化性能的研究
9.
Effect of temperature on the quality of electro-deposited Nickel-Tungsten coating
温度对镍钨合金镀层电镀质量的影响
10.
Research on Enhancing the Contact Fatigue Strength of Cast Iron Machine Elements with Alloy Coating and Alloying
表面合金镀层和合金化提高铸铁机械零件接触疲劳强度研究
11.
Structure of Coating and Alloy Layer for Hot Dip Aluminised Steel Strip
热浸镀铝钢带镀层与合金层的组织结构
12.
Study of residual stress of n-Al_2O_3/Ni composite coatings prepared by laser-enhanced electro-brush plating
激光强化电刷镀n-Al_2O_3/Ni复合镀层残余应力研究
13.
Coating Structure and Anti-corrosion Mechanism of Hot Dipped 55%Al-Zn Alloy on Sheet Steel
热浸镀55%Al-Zn合金镀层钢板的镀层结构及防腐蚀机理
14.
A layer of hot-dipped galvanizing causes a considerable reduction in the fatigue strength.
热浸镀锌层引起疲劳强度的显著降低。
15.
General Strength Criterion for Composite Laminated Structures
复合材料层合板结构的广义强度准则
16.
Structure and Properties of Ni-P-Diamond Electroless Composite Coating;
Ni-P-金刚石化学复合镀镀层的组织结构与性能
17.
Quality Control and Producting Process of Non-Spangle Galanize
热浸镀铝锌合金板的镀层结构及其性能
18.
Effect of Thermal Diffusion Treatment on the Composition and Properties of Hot-Dip Aluminizing Coating on TiAl Alloy
TiAl合金热浸镀铝及热扩散处理后的镀层结构