1.
The Small Hole Grinding and the Use of Wheel Quill Shaft Made by Carbide
小孔磨削及硬质合金砂轮套轴的使用
2.
An experimental study of drilling small and deep blind holes with an abrasive water jet
磨料水射流钻削深小盲孔的试验研究
3.
Drilling and forming mechanisms of ground surfaces in engineering ceramics
工程陶瓷的磨削钻孔及表面形成机理
4.
Effects of alloying additives on the grinding performance of porous wheels
合金化改善多孔砂轮磨削性能的研究
5.
"To grind an internal surface, a small wheel moves inside the hollow of the workpiece, which is gripped in a rotating chuck."
磨削内圆时,把小砂轮安装成能在工件的内孔中来回运动,工件夹在旋转的夹具内。
6.
small hole electrical discharge internal grinding machine
电火花小孔内圆磨床
7.
Internal Bore Processing of Precision Miniature Bearings Based on Spark Grinding
基于电火花磨削的精密微型轴承内孔加工
8.
Comparison on Processing of Large Diameter Cylindrical and Grinding Inside Hole with Rolling
大直径外圆和内孔磨削加工与滚压加工的比较
9.
Evaluation and Control Method of the Shaft & Hole Surface Roughness on Grinding Surface
轴、孔磨削表面粗糙度的评定与质量控制
10.
Wear characteristics of porous metal-bonded diamond grinding wheels during the grinding of ceramics
陶瓷磨削中新型多孔金属结合剂金刚石砂轮磨损特征研究
11.
flat-surface grinding machine, numerically controlled 0.01mm minimum accuracy
数控平面磨削机,最小确度为0.01mm
12.
flat-surface grinding machine, not numerically controlled 0.01mm minimum accuracy
非数控平面磨削机,最小精确度为0.01mm
13.
Characteristics of Small Hole Grinding for Hard and Brittle Materials;
硬脆材料小直径内圆磨削特性的研究
14.
high efficiency drilling system for small and deep hole
高效小直径深孔钻削系统
15.
The Academic Optimization of Cutting Parameter of Machining Small-deep Hole
小直径深孔加工切削用量的实验优选
16.
Application Study on The Grinding Ti-6Al-4V of Jet Impinging Cooling both in & out to Pore Grinding Wheel
微孔砂轮射流冲击内外冷却技术在钛合金磨削中的应用研究
17.
The Study on the Character of Grounding Surfaces with Fractal and Wavelet Theory;
分形、小波理论用于磨削加工表面的特性研究
18.
Monitoring of Cutting Tool Wear Based on Cutting Force by Using Wavelet Neural Network
基于切削力的小波神经网络刀具磨损状态监测