1.
Load Calculation and Fatigue Life Analysis of Crankshaft of Quintuple Cylinders Fracturing Pump
五缸压裂泵曲轴载荷计算及疲劳寿命分析
2.
Axial load-deformation curve and preload on angular con act ball bearings
角接触球轴承的轴向载荷—变形曲线和预紧
3.
Study on Load Analysis Method for Diesel Engine Crankshaft Main Bearing Based on ADAMS;
基于ADMAS的柴油机曲轴主轴承载荷分析方法研究
4.
ELASTIC DYNAMIC BUCKLING OF THIN CYLINDRICAL SHELLS SUBJECT TO AXIAL STEP LOAD
轴向阶梯载荷下薄圆柱壳的弹性动力屈曲
5.
Research on Axial Loading-Settlement Curve of Super-Long Bored Single Pile;
超长钻孔灌注单桩轴向荷载—沉降曲线研究
6.
Study on Dynamic Buckling of Axial Compression Member under Impact Load
冲击荷载作用下轴心受压构件动力屈曲研究
7.
Simulation on Load versus Strain Curves of Concentrically Compressed Concrete Filled Circular CFRP-Steel Tubular Stub Columns
圆CFRP-钢管混凝土轴压短柱荷载-应变曲线模拟
8.
Buckling of compressed bar subjected to combined effect of axial loads considering shear deformation
考虑剪切变形时轴向载荷联合作用下压杆屈曲
9.
Nonlinear Bending of Shallow Spherical Sandwich Shells Subjected to Axisymmetric Line Load
轴对称线荷载作用下夹层扁球壳的非线性弯曲
10.
The Design of Orifice Compensated Hydrostatic Bearing on Over Loading Crankshaft of Oxygen Compressor
氧气压缩机重载荷曲轴用小孔节流静压轴承的设计
11.
Twin-Characteristic-Parameters Method for Dynamic Buckling Analysis of Cylindrical Shells under Transient Step Load
轴向瞬间阶梯载荷下圆柱壳动力屈曲的双特征参数分析
12.
Load analysis and type choice of the crankshaft bearing ofcycloid 2K-V type gears;
摆线2K-V型传动曲柄轴承的载荷分析与选型设计
13.
Elastic buckling loads of shuttle tube steel columns with uniform cross section in the middle part under axial force
中部等截面轴心受压梭形钢管柱的弹性屈曲荷载
14.
load elongation diagram
载荷伸长曲线图，负荷伸长曲线图
15.
load elongation curve
载荷伸长曲线，负荷伸长曲线
16.
Load analysis of cylindrical roller bearing with inclined axis
圆柱滚子轴承轴线倾斜时的载荷分析
17.
The smallest load capable of maintaining the bar in a slightly bent form is called the critical or bucking load.
使杆保持稍微弯曲形状的最小载荷称为临界载荷或临界压曲载荷。
18.
Deep groove ball bearings mainly take radial load as well as take moderate axial load.
深沟球轴承主要承受径向载荷，也可承受一定量的轴向载荷。