1.
Research on the formability of 2E12 aluminum alloy
2E12铝合金板材成形性能试验研究
2.
Research on the Affect of Strain Rate Sensitivity of Viscous Medium on Formability of Sheet Metal;
粘性介质应变速率敏感性对板材成形性能影响的研究
3.
Hot Formability of Ti-Ni Alloy Sheet;
Ti-Ni合金板材热成形性能研究
4.
Research on Gas Bulging Forming of AZ31 Magnesium Alloy Sheet in High Temperature;
AZ31镁合金板材高温气胀成形性能研究
5.
Research on the Drawability Properties of AZ31B Magnesium Alloy Sheets on Warm Forming
AZ31B镁合金板材温成形冲压性能研究
6.
The Factors of Effecting the Punching Properties of Megnesium Alloys
影响镁合金板材冲压成形性能的因素
7.
Research on the property of 6061 alloy sheet drawing
6061铝合金板材冲压成形性能研究
8.
Investigation on Microstructures and Mechanical Properties of ME10 Magnesium Alloy Sheet with Extrusion-Rolling Process;
ME10镁合金板材挤压—轧制成形工艺及组织性能研究
9.
Drawbead Mechanics Characters and Influence on Subsequent Sheet Forming;
拉深筋的力能特性及对板材后续成形影响的研究
10.
Effect of Microelement Sr on Textures and Forming Properties of Al-Mg-Si-Cu Based Alloy Sheets;
微量Sr对Al-Mg-Si-Cu基合金板材织构及成形性能的影响
11.
Forming Limit and Numerical Simulation of Superplastic Magnesium Alloy Sheet by Consideration of Damage
考虑损伤效应的镁合金板材超塑性成形极限及其数值模拟
12.
Effect of anisotropy on incremental forming of magnesium alloy sheet and its microstructure evolution
各向异性对镁合金板材渐进成形的影响及微观组织演变
13.
The Research on Calculation of Springback and Shape Adjusting for Adjustable Plate Forming Device
基于活络式板材成形装置板材回弹量及压点调形计算的研究
14.
Technological Parameter and Forming Rule Study of Metal Sheet's Laser Forming
金属板材激光成形工艺参数及成形规律研究
15.
Research on the Key Problems of NC Incremental Sheet Metal Forming;
金属板材数控渐进成形关键技术研究
16.
Study on Laser Bending for Metal Sheets and Mechanism;
金属板材激光弯曲成形及其机理研究
17.
Study on Numerical Simulation and Experimental Research of Sheet Metal HydroForming;
板材液压成形的数值模拟及实验研究
18.
Finite Element Simulation of Sheet Metal Deep Drawing Process;
金属板材深冲成形过程的有限元模拟