1.
The accepted designation for the plane-strain fracture toughness under these environments is this.
在这些环境下平面应变断裂韧性所采用的符号是这个。
2.
Plane Strain Fracture Toughness Testing
平面应变断裂韧度测试的有效性研究
3.
Influence of strain fatigue on J_(IC)-the ductile fracture toughness of steels;
应变疲劳对钢材延性断裂韧度J_(IC)的影响
4.
The fractograph exhibited typical ductile dimple fracture pattern.
断裂形式呈韧性断裂,断口以韧窝为主。
5.
The Study on the Experiment of the Dynamic Fracture Toughness of Rate-dependent and Elastic-plastic Materials;
应变率相关弹塑性材料动态断裂韧性的试验研究
6.
Study on Mechanism and Criterion for Brittle/Ductile Fracture and Theory of Crack-tip Deformation;
脆性/韧性断裂机理与判据及裂尖变形理论研究
7.
AN APPROCH TO THE RELATIONSHIP BETWEEN THE FRACTURE TOUGHNESS OF NOTCH AND THE FRACTURE TOUGHNESS OF CRACK
切口断裂韧性与裂纹断裂韧性之间关系的探讨
8.
The alloys occur ductile fracture after annealing.
合金热轧态呈脆性准解理断裂,退火后转变为韧性断裂。
9.
Fracture Toughness and Failure Curve of 22NiMoCr3-7 Steel in Ductile-Brittle Transition Range
22NiMoCr3-7钢韧-脆转变区断裂韧度及断裂失效曲线
10.
Standard test method for plane-strain fracture toughness of metallic materials
GB/T4161-1984金属材料平面应变断裂韧度Kic试验方法
11.
The Study of High Polymer Bonded Explosives by Measuring the Plane Strain Fracture Toughness;
高聚物粘结炸药平面应变断裂韧度实验研究
12.
Study on Relation between Fracture toughness and Temperature for Nodular cast iron;
球墨铸铁断裂韧性随温度变化规律的研究
13.
The Characteristics of Structural Deformation for the Lingxia Ductile shear zone of Nenjing-Balihan Fault Belt in Northeastern China
嫩江—八里罕断裂带岭下韧性剪切带变形特征
14.
By way of suitable heat treatment, the tensile fracture morphology changes from brittle intercrystalline fracture to dimple fracture, so the strength and ductility of the alloy is increased.
采用适当的热处理工艺可使合金强韧化 ,拉伸断口由脆性的沿晶断裂变为韧窝状断裂。
15.
Recent research advance of application of ductile fracture criteria in sheet metal forming process
韧性断裂准则在板料成形中应用研究进展
16.
The steel trea-ted with this pruccss shows a fractograph with quasi-cleavage and dimple。
钢的断口为准解理十韧窝属于韧性断裂。
17.
FRACTURE TOUGHNESS PREDICTION OF A533B-1 STEEL OVER THE DUCTILE-BRITTLE TRANSITION RANGE BASED ON CONSTRAINT EVALUATION
A533B-1钢韧脆转变区断裂韧度预测的约束评估法
18.
Investigation on KIC of As-Deposited Ti-6Al-4V Alloy Fabricated by Laser Solid Forming
Ti-6Al-4V合金激光立体成形沉积态的平面应变断裂韧度