1.
encapsulated fuel unit
加密封套的燃料元件
2.
The Flaw Characteristic Analyse of Abrasive-liquid Device Sealed Sheath of High Pressure Water Jet System
高压水射流切割系统流化器密封套筒的裂纹特性分析
3.
BALL JOINT SEAL BOOT
球形接头密封防尘套
4.
He opened the cover in which the message was enclosed.
他把密封那份电报的封套拆开。
5.
Bite type tube fittings--Tipping washer
GB/T3762-1983卡套式管接头用尖角密封垫圈
6.
The temperature sensor is enclosed in a protective well.
温度传感器密封在保护套管中。
7.
Put the cartridge into the provided sealing bag with liquid exit downwards.
将墨盒出口向下放入配套的密封袋中。
8.
STRESSES ANALYSIS OF JACKETED ENCLOSING STRUCTURES BASED ON ANSYS
基于ANSYS的夹套密封环结构的应力分析
9.
Shaft Weather Seal: (Below bushing on some models.)
轴保护密封:(在某些型号上,轴保护密封位于衬套下方。)
10.
The primary and mating seal faces are lapped to a maximum of 3-helium light bands flatness to provide effective sealing and leakage protection.
主密封面和配套密封面叠加成最多3层的轻型带状平面,提高密封和防泄漏效果。
11.
Remove the rubber grommet seal from the reservoir and discar
从储液槽中拆下橡皮套环密封并抛弃它。
12.
Measures taken to prevent abrasion of the plunger in cylinder sleeve of a cryopump and to improve sealing performance
低温泵缸套柱塞防磨损和提高密封性的措施
13.
The Study of Bell Socket and Electrode of Solid Electrolyte Hydrogen Sensor
固体电解质测氢传感器的套接密封及电极研究
14.
Study on performance relationship between drilling rig speed and oil seal
钻机转速与配油套密封性能关系的研究
15.
A scheme of avoiding sleeve eroding based on TRIZ
应用TRIZ理论解决泵用机械密封轴套腐蚀问题
16.
Design and manufacture of hight pressure seal thread socket with large ddameter and big pitch
大直径大螺距高压密封螺纹套管设计与制造
17.
Casing damages are classified into deformation, breakage and sealing damages.
套管损坏主要分为套管变形、破损和密封性破坏3类。
18.
Backseat– machined bonnet stem bushing provides back-up stem seal.
(10) 后座-经过精密加工的阀盖阀杆衬套实现后座阀杆密封。