1.
Research and Prospect on the Technique for Bolt Axial Stress Measurement
螺栓轴向应力测量技术的研究概况及展望
2.
hydrauliccone-bolt coupling
液力锥形螺栓联轴器
3.
Elastic-plastic deformation effect on distribution of stress and axial force in a threaded bolt
弹塑性变形对螺栓应力和轴力分布的影响
4.
Tie Rod End Adjusting Sleeve Nut
转向拉杆端调整轴筒螺栓
5.
Remove the universal joint strap bolts at the pinion shaft yoke.
在小齿轮轴轴轭处拆卸万向节扣夹螺栓。
6.
Experimental Study on Fastening Bolt Axial Force of WSGG Anchor Basted on CFRP Sheet
CFRP波形齿锚具紧固螺栓轴力的试验
7.
Contact analysis of MW wind turbine hub and bearing bolt connection
风力机轮毂和轴承螺栓联接接触分析
8.
Inspect crankshaft, flexplate/flywheel and bolts for damagTighten to correct torque
检查曲轴、活动板/飞轮和螺栓是否松动。拧紧螺栓以校正扭力。
9.
stressed collar
剪力环（螺栓联接）
10.
Sturdy full-length threaded corrosion-resistant bolts provide the required high packing stress.
坚固的全螺纹防腐螺栓提供所需要的保压应力。
11.
Influence of nut thread shape and screwing length on bolt root stress;
螺母牙形及旋合长度对螺栓牙根部应力的影响
12.
By analysis, bolt fatigue stress is marginally high.
通过计算分析,螺栓的疲劳应力稍偏高。
13.
The calculation and balance of the axial force of borehole helico-axial multi-phase pump
井下螺旋轴流式多相混抽泵轴向力计算及平衡
14.
Remove nuts, U-bolts and spring bracket from axle.
由车轴拆下螺帽，U型螺栓和弹簧支架。
15.
The Fracture Failure Analysis on Main Bearing Bolts of the Diesel Engine and Investigation on Its Loading Behaviours;
柴油机主轴承螺栓断裂及其承载力学行为的研究
16.
Reason for Low Tight Axle Strength of 10.9S Sets of Torshear Type High Strength Bolt for Steel Structures
钢结构用10.9S扭剪型高强螺栓连接副紧固轴力偏低原因分析
17.
Regression Analysis of Relationship Between Axial Force and Torque of High-strength Bolt Connecting Steel Structure for Boiler Based on Experiment Data
基于试验数据的锅炉钢结构高强度螺栓轴力与扭矩关系回归分析
18.
Studies on two-way T-shaped bolt in rubber dam sticking craft;
双向“T”型螺栓在橡胶坝袋粘补工艺中的应用