1.
Application of ANSYS in the Design of the Molded Lines of the Value Core of an Adjustable Valve
ANSYS软件在调节阀阀芯型线设计中的应用
2.
Inferential Reasoning on the Mathematical Model of Value Plug of Control Value
调节阀柱塞型阀芯形面数学模型推导
3.
The Intelligent Fitting Method for Valve Core Curve Based on Flow Characteristics of Regulating Valve
基于流量特性的调节阀阀芯曲线智能拟合
4.
Design Improvement of Valve Spool for Proportional Throttle Valve
位移电反馈型比例节流阀的阀芯设计改进
5.
R&D of a Valve Terminal Based on Modbus TCP;
Modbus TCP总线型阀岛的研制
6.
Discussion on The Equilibrium Equation of Forced Y Forerunner Spillway Value core“P*A=P1*B+K0*X0”;
Y型先导式溢流阀阀芯受力平衡方程“P*A=P_1*B+K_0*X_0”及其应用
7.
Straight moving type relief valves, mainly valve disc, valve body,, spring-loaded, roof, regulation pole, conditioning nut, and other integral parts.
直动型溢流阀，主要有阀芯、阀体、弹簧、上盖、调节杆、调节螺母等零件组成。
8.
The Fig. 1710 Balancing valve is a non-rising stem design incorporating a parabolic (plug) shaped disc.
型号1710平衡阀为暗杆结构，配置抛物线(塞)形阀瓣。
9.
A new servovalve using a pressure control pilot state was introduced, which uses two spools instead of single spool in power magnifying stage.
介绍了一种新型的压力先导控制伺服阀,该阀的功率放大级采用双阀芯结构代替传统单阀芯结构。
10.
Performance Comparison of Permalloy Core and Coreless Solenoidal Microinductors
铁芯和空芯螺线管型微电感器的性能比较
11.
The Design of 10-bit High-Speed Pipelined Analog-to-Digital Converter;
流水线型10-bit高速ADC芯片设计
12.
The Study of the Control System to Product Line of Flux-Cored Wire;
新型药芯焊丝生产线控制系统的研究
13.
FPGA Prototype Verification of ARINC 659 Bus Interface Chip
ARINC 659总线接口芯片的FPGA原型验证
14.
The Application of Bus-valve Island in the Automated Production Line
总线型阀岛在自动化生产线实训台中的应用
15.
CFD Study for the Flow Field between the Valve Core and the Valve Sleeve;
阀芯阀套间缝隙内部流场的CFD计算
16.
Dynamic Analysis of a Spindle of Pilot-operated Solenoid Valve
两级先导式电磁阀主阀芯动力学分析
17.
Safety Valve Core Sensor And Data Acquisition System
安全阀阀芯传感器及其数据采集系统
18.
Main techniques of the string of gap-type thermal-resistant aluminum-alloy stranded conductor
间隙型钢芯耐热铝合金导线架线施工技术要点