1.
Place the new pump in position and tighten mounting bolts.
使水泵就位，拧紧装配螺栓。
2.
Adopt U double-layer longitudinal pattern and tight assembly technology to prevent plate stress from affecting separator elasticity.
采用U型双层纵向包膜方式和紧装配技术，有效的防止了极板应力对隔膜弹性的影响。
3.
hunting vest with elastic loop for shells
配松紧子弹带的猎装背心
4.
Assemble module adaptor hand tight to bottom half.
安装模块适配器，用手将其紧固在下半部地方。
5.
Stainless steel fasteners provided throughout assembly.
在装配的全过程中，均采用不锈钢紧固件。
6.
Optimal Location of Emergent Reactive Power Compensation in Power Transmission Network;
输电网紧急无功补偿装置的最优配置研究
7.
Conceptual Design of A Fast Clasping Mechanism Based on QFD;
质量功能配置下的快速夹紧装置概念设计
8.
Study on the positioning and clamping of tractor transmission box on assembly line
拖拉机变速器装配线上箱体的定位夹紧研究
9.
The application of fastening technology in cylinder head assembly
拧紧技术在发动机汽缸盖装配中的应用
10.
close running fit
紧动配合,紧转配合
11.
To join or fit closely or tightly.
紧密连接，紧密配合
12.
fit tightly and fasten.
紧紧地相配合和扎牢。
13.
Install and inspect the fit of the windshield on the pinchweld flanges as follows:
安装并检查夹紧焊接凸缘上挡风玻璃的配件如下：
14.
Double Nuts Anti-loosening link Assembly Screwing down Process Theoretic Analysis
双螺母防松时螺栓联接装配拧紧工艺的初步理论分析
15.
Device Reformation and Practice of Positioning and Clamping for Transmission Box Body on Assembly Line
装配线上变速器箱体定位夹紧机构的改进与实践
16.
Install the pinion mate shaft lock screw finger tight to hold shaft during differential installation.
在差速器安装期间，安装小齿轮配合轴锁螺丝，用手紧固它，以把握住轴。
17.
Install the handbook , all assembling of complete fastening screw according to, read all above important safe explanation carefully please.
根据本安装手册,完全紧固所有的装配螺钉,请认真阅读以上重要的安全说明."
18.
built-in differential lock
内装式压差锁紧装置