1.
Application of Defect Elimination Method in the Technical Reform of 5~# Ball Mill
缺陷消除法在5~#风扫磨技术改造中的应用
2.
Research on the Density Improvment and Micro-defect Elimination during DLMS;
DLMS技术致密度提高及微观缺陷消除的试验研究
3.
Research of Automatic Setting Injection Molding Processing Parameters and Correction Part Defect Based on Fuzzy Inference;
注塑过程参数的自动设定与基于模糊推理的制品缺陷消除的研究
4.
"After the defects have been eliminated, additional performance Test shall be carried out as soon as possible in accordance with Appendix 10."
在上述缺陷消除后,应按照本合同附件十的规定尽快进行第二次性能测试。
5.
The party responsible for the fail shall take appropriate measures to eliminate the defects and/or facilitate Commissioning.
责任方应采取适当措施消除缺陷
6.
Pit- A non-removable imperfection found on the surface of a wafer.
深坑-一种晶圆片表面无法消除的缺陷。
7.
Coating surface defect on hot-dip galvanized steel sheet and its preventive measures
热镀锌板镀层表面缺陷及其消除措施
8.
Measures to Eliminate Leakage of JL465Q Cylinder Body
消除JL465Q缸体渗漏缺陷的措施
9.
Elimination of gas holes of laser cladding on 2A12 aluminum alloys
消除2A12激光熔覆气孔缺陷工艺
10.
Abolish the shrink-looseness shortage of conjunctive plates cast of shearer roller
消除采煤机滚筒联接盘类铸件的缩松缺陷
11.
Enterprises Technological Innovation in China: the Defect of Market Str ucture and Its Elimination;
我国企业技术创新:市场结构缺陷与消除
12.
Elimination Ways of Dense Blow-Holes Defect on the Double Side Face of Ductile Iron Ring
消除球铁环双端面聚集孔洞缺陷的途径
13.
Eliminating Surface Defects to Increase Quality Rate of Cast Aluminum Slab Ingot
有效消除表面缺陷 提高铝扁锭铸造成品率
14.
Analysis of the Causation of Aluminum Vacuum Brazing Defects and Its Technical Eliminating Measure
铝合金真空硬钎焊缺陷分析与消除措施
15.
Patching helps eliminate software flaws that can be used to inject malicious kernel code.
打补丁有助于消除软件缺陷，这些缺陷可能会被用来注入恶意内核代码。
16.
Repair the defective Contract Equipment or eliminate the defects or discrepancies of the Contract Equipment at the Seller's expenses.
卖方负担费用修理有缺陷的合同设备或消除合同设备的缺陷或与合同规定不符之处
17.
the Seller shall take measures to eliminate the defects in the Contract Plant within the period agreed upon Both by parties.
卖方应在双方协商的期限内采取措施消除缺陷,所有涉及的费用
18.
A simplified asymmetric rolling process capable of eliminating the said defect is put forward and relevant calculation conducted.
提出了用非对称法轧制消除该缺陷的简便方法，并进行了分析计算。