1.
We are looking for steel casting suplliers for our larger size valves.
现在正在寻找钢铁铸件的供应商,支持我们的大型阀门的制造.
2.
Complete valve data: figure number and valve size.
完整的阀门参数：型号和阀门通径。
3.
Fundamental technical requirements for large and medium inlet valves of hydraulic turbine
GB/T14478-1993大中型水轮机进水阀门基本技术条件
4.
Impact Analysis of Valve Status Variation in Large Water Distribution System Based on Transient Flow Analysis
大型复杂给水管网中阀门状态变化影响分析
5.
CBV angle-style valves are designed to replace piping elbows.
CBV角型阀门可用于取代管道弯头。
6.
Medical Gas Cylinders with Post-Type Valves
带有柱型阀门的医用气体钢瓶
7.
Type of valve- gate, globe, check, etc.
阀门种类：闸阀，截止阀，止回阀，蝶阀，球阀，等等。
8.
Technology Measures for Improving Surface Quality of Large Bore Valves
提高大口径阀门表面质量的技术措施
9.
The NIBCO valve figure number and size must also be furnished and specify valve stem coupling for use with floor stand.
另外还要提供尼伯科阀门型号和尺寸,并说明所要采用的阀门阀杆与地轴架的连接装置。
10.
"The by-pass valve used on standard iron valves is a globe valve. Specify by adding (Z) to Figure Number, i.e. F-00-Z."
用在标准铸铁阀门上的旁通路阀门是截止阀。订购时要在型号上加(Z),如:F-000-Z。
11.
"Specify valve size, figure number and length to be added to existing stem length (dimension a)."
请说明阀门的公称通径、型号和加在现有阀杆上的长度(尺寸"a")。
12.
For field replacement, specify valve type and size. Square Stem Only.
用于现场更换，订购时指定阀门类型和通径。仅限于方形阀杆。
13.
Some styles are spring-actuated for immediate closure when flow stops.
有些类型止回阀配置弹簧驱动,能够在流动停止时,立即关闭阀门。
14.
General purpose industrial valves-Diaphragm valves
GB/T12239-1989通用阀门隔膜阀
15.
pneumatic cylinder cock valve
风动汽缸排水阀阀门
16.
Valve without actuator. Two-way or 3-way can be specified. Valve ports can be resized.
没有传动装置的阀门。可以指定双向或三向。可调整阀口的大小。
17.
Operating Principle: The tied-diaphragm valve is a handwheel-operated valve, utilizing a two-piece stem connected through the diaphragms.
运转原理：束缚隔膜阀是采用通过横膈膜连接的两个阀杆的手轮型阀门。
18.
M701F Gas Turbine Valve Calibrating Method,Fault Analysis and Remedy
三菱M701F型燃机阀门校验方法及故障分析与处理