1.
Study on the Removal Mechanism and Grinding Technique of the PCD Cutting Tools;
PCD刀具磨削机理及刃磨工艺研究
2.
Identification of Cutter Wear in Variable Cutting Parameters Milling;
变切削参数铣削加工中刀具磨损辨识
3.
A cutting tool is wear-resistant if it resists abrasion at the cutting edge and along the tool face. Wear resistance improves as cutting tool hardness increases.
如果切削刀具的刃口和刀面耐磨,刀具就不易磨损。切削刀具的硬度越高,耐磨性就越好。
4.
Study on the Tool Wear Mechanism and Tool Life for High-Speed Milling Titanium Alloy Ti6Al4V
高速铣削钛合金Ti6Al4V的刀具磨损研究
5.
Tool-wear Monitoring Based on LPCC of Cutting Sound
基于切削声LPCC的刀具磨损监测
6.
Causes and Preventive Measures of Tool Grinding Cracks
刀具产生磨削裂纹的原因及预防措施
7.
Wear Mechanisms of PCBN Tool in Hard Turning
PCBN刀具硬态车削的磨损机制研究
8.
Monitoring and Analysis of the Tool Wear and Break in Dry Machining Process
干切削过程刀具磨损、破损监测与分析
9.
A fine - grained whetstone for giving a keen edge to a cutting tool.
细磨刀石纹理细密的磨刀,可使切削工具刀刃锋利
10.
Research on Grinding Method of Drilling Cutter's Flank
基于钻削刀具后刀面刃磨方程建立的研究
11.
Experiment Study on Force and Wear of Diamond Tool of Glass Grinding
玻璃磨削中切削力和金刚石刀具磨破损的实验研究
12.
Study of Characteristics of Tool Wear and Adaptability of Tool in Electric Hot Machining;
导电加热切削刀具磨损特性及刀具适应性的研究
13.
Study on Tribological Behavior and Tool Life in Ti6Al4V High Performance Machining
钛合金Ti6Al4V高效切削刀具摩擦磨损特性及刀具寿命研究
14.
However, tool wear is high in USM, due to the abrasive cutting action.
但是,由于USM是磨削加工,因而刀具损耗大。
15.
Study on the Wear-behavior of Woodworking Tools for to Optimize Machining Wood;
木工刀具磨损特性与木材切削加工优化的研究
16.
The Investigation of Intelligent Tool Wear Monitoring Techniques for Metal Cutting Process;
切削加工过程中刀具磨损的智能监测技术研究
17.
Research on Cutter Wear State Recognition Base on Milling Force Signal;
基于铣削力信号的刀具磨损状态识别研究
18.
Research on Grinding Technology and Cutting Performance of PCD Tools;
聚晶金刚石刀具刃磨工艺与切削性能的研究