1.
Tilt Tolerance of the Moving Mirror in Michelson Interferometric Spectrometer
迈克尔逊干涉光谱仪动镜倾斜误差容限分析
2.
Programming Method for Multi-crack Damage Tolerance Analysis of General Structures;
适用于新结构的多裂纹损伤容限分析程序实现方法
3.
EXPERIMENT STUDY AND FINITE ELEMENT ANALYSIS FOR CONTAINERLESS PROCESSING BY ACOUSTIC LEVITATION
声悬浮无容器处理的实验研究及有限元分析
4.
Numerical Limit and Shakedown Analyses of the Pressure Vessels with Part-Through Slots;
含凹坑缺陷压力容器极限与安定性数值分析
5.
Lower-bound Shakedown Analysis of Vessels Containing Defects Subjected to Multitypes of Variable Loads;
多组载荷作用下含缺陷容器的下限安定分析
6.
Analysis and FEM Stimulation of the Dilatancy and the Plastic Softening Deformation in Soft Rock Tunnel;
软岩巷道围岩扩容—塑性软化变形及有限元分析
7.
Limit Analysis of Pressure Vessels with Pad Reinforcement under In-plane Moment on Nozzles;
接管纵向弯矩作用下带补强圈容器的极限分析
8.
The FEA and Design of Vacuum Vessel for Special Deposition Facility;
特种成膜设备真空容器设计及有限元分析
9.
Stress analysis of Opening Tubing Connection Zone for High Pressure Vessels Based Finite Element;
基于有限元的高压容器开孔接管区应力分析
10.
Analysis of the Resonant Frequency of Capacitive Micro-Machined Ultrasonic Transducer(cMUT) with Finite Element Method
硅微电容式超声换能器谐振频率的有限元分析
11.
The strength analysis of man hole with yoke of blast chamber
爆炸容器卡箍式人孔门结构的有限元分析
12.
Feasibility Analysis on Developing High Voltage and Large Capacity Permanent-magnet-biased Fault Current Limiter
永磁饱和型故障限流器的高压大容量化分析
13.
Lateral Shift Tolerance of Moving Cat's-Eye Retroreflector and Inclination of Secondary Mirror
猫眼动镜横移误差容限及次镜倾斜分析
14.
Finite element analysis in the design of large vacuum chamber
大型真空容器结构设计中的有限元分析与应用
15.
Analysis of Influence of Time Step on Numerical Simulation Using Finite Volume Method
时间步长对有限容积法数值模拟的影响分析
16.
Limit Analysis for Cylindrical Shells with Opening-reinforcement under In-plane Moment
接管纵向弯矩下带补强圈容器结构的极限分析
17.
On Capacity of MIMO Fading Channel with Finite-size Constellation
有限状态下MIMO信道容量的研究及仿真分析
18.
Synthetical Analysis of Durability and Damage Tolerance of Aircraft Structural Members under Corrosive Condition
腐蚀条件下飞机结构耐久性/损伤容限综合分析