1.
Application of differential laser Doppler velocimeter in solid velocity measurement
差动激光多普勒测速仪在固体速度测量中的应用
2.
The downward velocity of solids is sufficiently high.
固体的向下速度相当高。
3.
Gases, liquids and solids do not increase in volume at the same speed.
气体、液体和固体体积膨胀的速度不一样。
4.
The speed of sound varies in solids,liquids and gases.
在固体、液体和气体中，声音的速度不一样。
5.
False ? Detoxification occurs at a fixed rate and is unaffected by rate of consumption.
错：人体解毒酒精的功能是有固定速率的，并不受饮酒速度的影响。
6.
Speed Control Switch Mounting Screws
速度控制开关固定螺丝
7.
Influence of solidification rate on solid-liquid interface in unidirectional solidification microstructure of austenitic stainless steel
凝固速度对奥氏体不锈钢定向凝固组织及其固液界面稳定性的影响
8.
The solid decomposed rapidly with blackening.
固体迅速分解并变暗。
9.
Development of Solid Surface Velocity Laser Double Focus Cross-correlation Measurement System Based on FPGA;
基于FPGA的固体表面速度激光双焦点互相关测量系统研制
10.
Effect of Cooling Rate on Microstructure and Solidification Mode in Cr15Mn9Cu2Ni1N Austenitic Stainless Steel
冷却速度对奥氏体不锈钢Cr15Mn9Cu2Ni1N组织与凝固模式的影响
11.
The rate of curing and consequently the rate of heat generation increase with the temperature.
固化速度，因而还有放热速度，都随温度而增加。
12.
The results of experiment have shown that gas pendulum can be utilized to measure the acceleration and tilt angle as same as solid pendulum and liquid pendulum.
试验结果表明,与固体摆、体摆一样,利用气体摆原理亦能检测加速度和倾角。
13.
The degree of mixing and the rate of approach to uniformity will depend on the frequency of turnover of solids.
混合的程度和达到均匀混合的速度，将由固体颗粒在单位时间内翻转的次数来决定。
14.
Research on Over-cured Depth in Stereolithography Process
光固化快速成形工艺中过固化深度的研究
15.
At zero water is frozen solid.
零度时水冻结为固体。
16.
fixed field alternating gradient synchrotron
固定磁场交变梯度同步加速器
17.
ffag synchrotron
固定场交变梯度回旋加速器
18.
Fixes the layout of the items such that they are rendered more quickly
固定项目布局以使显示速度更快。