1.
Performance Analysis, Engineering Application, Design and Evaluating of Coaxial Tripropellant Injector;
同轴式三组元喷嘴性能分析、工程应用及设计评定
2.
Finite Element Analysis on 3D Flow in the Nozzle and Shock Stress of the Needle in Diesel Engine Injector;
柴油机喷油嘴三维流场及针阀碰撞有限元分析
3.
The Analysis and Improvement on the Wearing of the Burner Nozzle of Mitsubishi 700 MW Unit Boiler
三菱700MW机组锅炉燃烧器喷嘴的磨损分析及改进
4.
outlet triangle
喷嘴出口速度三角图
5.
ISA 1932 nozzle
ISA 1932喷嘴
6.
Three Dimensional Numerical Simulation on Single Atomizer Blend Flow Pressure Spray Dryer;
单喷嘴混流压力式喷雾干燥塔三维数值模拟
7.
3-D Stimulation and Analysis of Weft Insertion Flow of Main Nozzle in an Air Jet Loom
喷气织机主喷嘴气流引纬三维数值模拟分析
8.
CFD Calculation of the Two-Phase Flow inside K-Factor Injection Nozzle
K系数喷油嘴喷孔内气液两相流动的三维模拟
9.
Three Dimensional Numerical Simulation of Flow Characteristic in Ultra-multi Hole Injector
超多喷孔喷油嘴流动特性的三维数值模拟
10.
Correction of Temperature Display in Governing Stage of Nozzle Governing Steam Turbine Unit
喷嘴配汽汽轮机组调节级温度的修正
11.
Microstructures and Properties of Mo_2FeB_2 Cermets Coating by Reactive Flame Spraying on the Surface of H13 Steel
H13钢表面反应火焰喷涂三元硼化物金属陶瓷涂层的组织和性能
12.
Microstructures and Properties of Mo_2FeB_2 Cermets Coating by Reactive Flame Spraying
反应火焰喷涂三元硼化物金属陶瓷涂层的组织和性能
13.
aperture atomizer
喷孔式喷油嘴喷雾器
14.
Research on Erosion Wear Mechanisms of Ceramic Sandblasting Nozzles Using FEA Methods;
基于有限元法的陶瓷喷砂嘴冲蚀磨损机理研究
15.
The 3D Numerical Simulation of the Flow Field and Experiment Study on High-pressure Water Descaling Nozzle;
高压除鳞喷嘴流场三维数值模拟与试验研究
16.
3D numerical simulation of cavitation transient flow inside diesel injection nozzles
柴油机喷嘴内部空穴流动的三维瞬态数值模拟
17.
Study on Three-dimensional Swirling Airflow and Motion of Flexible Fiber in Air-jet Spinning Nozzle
喷气纺纱喷嘴内三维旋转气流场及柔性纤维运动的研究
18.
In Roadheader spray system and three screw type spray nozzle design and application
掘进机内喷雾系统及三层螺旋式喷嘴的设计与应用