1.
Characterization and Measurement of Metals Dynamic Fracture Toughness;
金属材料动态断裂韧性的表征与测试
2.
Finite Element Analysis on Testing Dynamic Fracture Toughness of Rock
岩石类材料动态断裂韧性测试的有限元分析
3.
The Study on the Experiment of the Dynamic Fracture Toughness of Rate-dependent and Elastic-plastic Materials;
应变率相关弹塑性材料动态断裂韧性的试验研究
4.
The Meso-mechanism and Macroscopical Models of Ductile Failure in Pressure Vessel and the Relation between Them and Stress-State;
压力容器材料两种韧性断裂形态的分析研究
5.
Preparation and Fracture Toughness of Sm_2Zr_2O_7/SiC Composites
Sm_2Zr_2O_7/SiC复合材料及其断裂韧性的研究
6.
Impact of Tempering Temperature on Fracture Toughness of High Tenacious Steel(GDL-1)
回火温度对GDL-1高强韧新材料断裂韧性的影响
7.
The problem of ductile fracture of metals under complex stress has been investigated extensively, but has not been resolved as yet.
金属材料在复杂应力状态下的韧性断裂是断裂力学研究的重要问题之一。
8.
Numerical Simulation on Ductile Farcture Considering Micro-Plastic Damage;
考虑材料微观塑性损伤的韧性断裂数值模拟
9.
" Metallic materials-Standard test method for JIC, a measure of ductile fracture toughness"
GB/T2038-1991金属材料延性断裂韧度JIC试验方法
10.
Study of Interlaminar Fracture Toughness Improvement on Fabric-Reinforced Laminates;
层合板复合材料层间断裂韧性的提高研究
11.
A Concern and Influential Factors on Fracture Toughness of SiC Partiuclate-reinforced AI Matrix Composite Materials;
SiCp/Al复合材料断裂韧性的影响因素及思考
12.
Effect of Specimens′ Orientations on Fracture Toughness of 15%SiC_p/2009Al Composites
试样取向对15%SiC_p/2009Al复合材料断裂韧性的影响
13.
Numerical study on the mode Ⅰ fracture toughness of Z-pin reinforced laminates
Z-pin增强复合材料Ⅰ型断裂韧性数值分析
14.
Fracture Toughness Test of Composites with Ply Splice
复合材料铺层拼接层间断裂韧性的试验研究
15.
The composite displays the fracture features of the dimple and intergranular fracture.
复合材料的断裂形貌为韧窝加沿晶断裂。
16.
THE ADHESION AND THE FRACTURE ENERGY AT THE TNTERFACE OF COMPOSITES OF ARAM ID FIBER WITH ACTIVE SKIN LAYER
表面改性芳纶复合材料的界面粘结与界面断裂韧性
17.
The material fracture toughness was adequate to ensure development of the full fatigue resistance of the weld detail.
材料的断裂韧性可充分满足焊缝细节疲劳抗力的发挥。
18.
Study on Modes of Ductile Fracture of Metal and Its Application in Pressure Vessel;
金属材料韧性断裂模式的分析及其在压力容器中的应用