1.
The Interrupting Capability Computation and Analyses of 252kV Self-extinguishing Type SF6 Circuit Breaker;
252kV自能式SF_6断路器开断性能计算与分析
2.
Study of the Influences of Arc Nozzle Interrupting Chamber Parameters on the Breaking Performance of SF_6 Circuit Breaker
灭弧室结构参数对SF_6断路器开断性能影响的研究
3.
Pressure characteristic of cold gas flow interruption for a self-blast SF_6 circuit breaker
自能SF_6断路器冷气流开断压力特性
4.
The Property,Function and the Development of Situational Judgment Tests;
情景判断测验的性质、功能与开发编制
5.
The behavior and performance of the cracked flange plates suggest that good levels of fracture toughness exist in the A 517 steel.
开裂的翼缘板的性能及使用状态说明A517钢的断裂韧性良好。
6.
Effects of Turn-off Angle to System for Switched Reluctance Motor Drives Based on Nonlinear Model
基于非线性模型的开关磁阻电机关断角对系统性能的影响
7.
Experimental Study on Physical Performance of the 50 Series Thermal Insulation Aluminium Alloy Case Window
50系列断热平开铝合金窗三性物理性能研发试验
8.
capacity current breaking test
电容性电流开断试验
9.
It always seemed impossible he would move or fire his gun, expose his life.
他动一动或开枪都是不可能的，那样则会断送性命。
10.
A device that periodically and automatically opens and closes an electric circuit, producing pulses.
断续器一种阶段性的能自动打开及关闭电路并产生脉冲的仪器
11.
5. Advanced: remote control of the client off-line and connection to the server;
(5) 先进性，能实现远程对客户端断开与服务端连接的控制；
12.
The Significance of Combination of Electrophysiology and Automated Perimetry Tests on the Early Diagnosis of Primary Open Angle Glaucoma
联合多种视功能检查对原发性开角型青光眼早期诊断的意义
13.
KEY OFDISCONNECT THE RIGHT MULTI-FUNCTION SWITCH CONNECTOR.
关闭。断开右多功能开关接头。＊＊
14.
The switch wire harness must be disconnected before testing switch continuity.
在测试导通性之前必须断开开关线束。
15.
When the switch is off, the circuit is open and electricity doesn't go through.
当开关断开时，电路就形成开路，电流不能通过。
16.
Equivalency Analysis and Test Method of High Power Test for Ultra-high Voltage Circuit Breakers
特高压断路器的大容量开断试验等价性分析与开断试验方法
17.
A load-break switch will switch normal load currents but will not interrupt short circuit cur- rents.
负荷开关可开断正常负荷电流但不能开断短路电流。
18.
Research on Chip-Breaking Capability and Machining Chip-Breaking Predictive System with 3-D Complicated Grooved Inserts in Turning;
三维复杂断屑槽断屑性能及断屑预报系统研究