1.
Design and kinematics simulation of moving Cam machine based on PRO/Engineer
基于PRO/E的移动凸轮机构的设计与运动学仿真
2.
cam shaft displacement control for reversing engines
可倒转发动机的凸轮轴位移控制器
3.
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
4.
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置
5.
cam shaft drive
凸轮轴传动凸轮轴传动装置
6.
propeller shaft pinion flange
传动轴主动齿轮凸缘
7.
As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
8.
Close the pivot cover and move the rear wiper blade to the Park position on the ramp.
关闭枢轴盖且移动后雨刷片至在凸轮滑道park（停止）位置。
9.
Design and Motion Simulation Analysis of a seedling Supporting Mechanism with Cam and Oscillating Bar Used for Transplanters Based on ADAMS
基于ADAMS的移栽机用凸轮摆杆扶苗机构设计及运动仿真分析
10.
cam-controlled single spindle automatic lathe
凸轮控制单轴自动车床
11.
overhead camshaft engine
上置式凸轮轴发动机
12.
cam controlled automatic by-pass valve
凸轮控制自动旁通阀
13.
crankcase cam gear bushing
曲轴箱凸轮传动轴衬套
14.
rotary-type cam-driven tableting press
旋转式凸轮驱动压片机
15.
motor-operated cam type flash welder
电动凸轮式闪光焊机
16.
Design Method of Cam Outline for Floating Cam
一种浮动式凸轮机构凸轮廓线的设计方法
17.
Design and Dynamic Simulation of Cam Automatic Feeding System for Assembled Camshaft
装配式凸轮轴凸轮上料系统设计及动力学仿真
18.
As the camshaft rotates, the lobe, or high spot of the cam, pushes against parts connected to the stem of the valve.
当凸轮轴旋转时，凸轮凸起的或者高点的位置，推动气门座。