1.
Research on Method to Confirm Minimum Radius of Circular Curve of Mountain Expressway;
山区高速公路圆曲线最小半径确定方法的研究
2.
minimum digging radius at floor level
停机面最小挖掘半径
3.
Study on the Minimum Value of Curve Radius in Shield Construction;
盾构法施工最小曲线半径取值的研究
4.
The Ordering of the Connected Graphs with the Smallest Laplacian Spectral Radii;
连通图的最小Laplace谱半径的排序
5.
The Research of Lowest Radius to High-Speed Railways with Ballastless Tracks;
无碴轨道高速铁路最小曲线半径研究
6.
Mathematic calculation approach of minimum bending radius of mandrel based on Matlab
基于Matlab的芯轴最小弯曲半径计算
7.
Lower and Upper Orientable Strong Radius and Diameter of Cartesian Product of Paths
路和路的笛卡尔积的最小和最大定向强半径和强直径(英文)
8.
The Calculation of the Minimal Turning Radius and the Setting of the Fire Road Width
消防车道最小转弯半径以及通道宽度的计算
9.
Study on Curve Radius Standard for Linear Metro
直线电机轮轨交通线路最小平曲线半径研究
10.
Clustering Algorithm Based on Residual Energy and Least Adjacent Clustering Radius
基于剩余能量与最小邻近簇半径的成簇算法
11.
Defining Minimum Base Radius of Plate Cam for Oscillating Follower by 0.618 Optimization Method
0.618法最优确定盘状摆动凸轮机构的最小基圆半径
12.
radial gap of double-cone ring
双锥环的最大半径间隙
13.
maximum reach at ground level
停机面最大挖掘半径
14.
All sharp corners to have 0.01 Max. Radii.
所有尖角最大半径0.01
15.
ALL INSIDE CORNERS TO BE .38 RADIUS MAX
所有内角最大半径0.38
16.
DETERMING THE MINIMAL RADIUS OF BASE CIRCLE OF A CAM WITH TRANSLETINGA POINT FOLLOWER ACCORING TO THE ALLOWABLE PRESSURE ANGLE[α]
按许用压力角(α)确定直动从动件盘形凸轮机构凸轮最小基圆半径
17.
A Study of Burr Fillister Sizes as well as the Minimum Fillet Radius of a Final Forging Die with the Finite Element Method
毛边槽尺寸与终锻模最小圆角半径的有限元法研究
18.
Study on the Criteria for Minimum Radius of Curve and the Transition Curve for 160km/h Railway Track
时速160公里铁路最小曲线半径与缓和曲线设计标准的研究