1.
Welding parameter.( Reference values for electric socket welding-welding time and cooling time.
熔接参数(考数值为电承插热熔，热熔时间和冷却时间.
2.
fusing time-current test
熔丝时间-电流试验
3.
The melting sticking occurred when the melting point of materials is lower than the drying temperature.
物料熔点低于干燥温度时容易产生热熔性粘壁。
4.
heat fusion press
热熔转印机，热熔压烫机
5.
Iron will melt when it is made very hot.
当铁烧得很热时就会熔化的。
6.
It uses of heat glue to save the gluing time and meet the environmental needs.
该机采用热熔胶，可节省上白胶，黄胶过烤箱之时间，并且符合环保要求。
7.
having the property of softening or fusing when heated and of hardening and becoming rigid again when cooled.
有软化或熔化的特性，当加热时变软、冷却时变硬。
8.
a fuse made to burn for a given time (especially to explode a bomb).
在一定时间内燃烧的熔丝。
9.
Each stripe took the same amount of time to melt.
每一条都花相同的时间才熔化。
10.
The smelting time has been cut by one-tenth.
熔练时间缩短了十分之一。
11.
Research on Prediction Model of GMAW Ignition Time
熔化极气体保护焊引弧时间预测模型
12.
Effect of Electric Boosting on Heat Exchange in Flame Space of End Port Furnace
电助熔在马蹄焰窑火焰空间热交换中的作用
13.
To melt(a solid)by heating.
熔化通过加热熔化固体
14.
The Basic concept of injection molding revolves around the ability of a thermoplastic material to be softened by heat and to harden when cooled.
注射成型的基本概念是使热塑性材料在受热时熔融,冷却时硬化。
15.
Thermoelectric calculation and technological analysis during melting in vacuum consumable electro-arc furnace
真空自耗电弧炉熔炼时的电热计算与技术分析
16.
BEHAVIOR OF NON-METALLIC INCLUSIONS IN AN ELECTRIC RESISTANCE ALLOY DURING ESR
非金属夹杂物在电渣重熔电热合金时的行为
17.
Technique Which Spans Two Centuries-Hot Melt Adhesive Technique:Hot Melt Adhesive And Hot Melt System
跨世纪的技术──热熔胶技术：热熔胶和热熔系统
18.
A Digital Measuring Instrument for Fuse Time-Current Characteristic Test
熔断器时间—电流特性试验的数字检测装置