1.
The Statistical Distribution of Bolt-Hole Clearance in Bolt Joints;
螺栓连接件中栓孔间隙分布规律的研究
2.
The pore spaces are completely dominated by primary porosity and pores, vogs and fractures with secondary origination.
孔隙空间主要是原生孔隙及由次生原因形成的孔隙和裂缝。
3.
High spline clearance on driveshaft(s) (usually 42LE)
传动轴上高度栓槽间隙（通常４２ＬＥ）
4.
Pores are the air space between the particles?
颗粒之间空气所占据的空间叫做孔隙
5.
Air enters the pore space and air-water interfaces are present in the pore space.
空气进入孔隙空间且在孔隙空间存在空气-水接触面。
6.
Original porosity is typified by the intergranular porosity of sandstones and the intercrystalline and politic porosity of some limestones.
原生孔隙度以砂岩粒间孔隙度和某些石灰石的晶体粒间和鲕状孔隙度为代表。
7.
The ratio of the volume of all the pores in a material to the volume of the whole.
孔隙率一材料中孔隙的总体积与整个材料的体积之间的比率
8.
Porous Structure-An Analysis of the Traditional Township Space;
孔隙结构—传统小城镇空间的一种解析
9.
Apply ANSYS in Optimizing Eyelet Clearance of Punching Die;
ANSYS在小孔冲模间隙优化中的应用
10.
Instantaneous Clearance of Ordinary Punching and Precise Punching Without Burr and Its Influence on Punching Quality
普通冲孔与无飞边精密冲孔的瞬时间隙及对冲孔质量的影响
11.
Intermediate arrays have porosities falling between these limits.
中间的排列方式，孔隙率介于这两个值之间。
12.
A loaded pin bears on a hole with small clearance.
一个受载销钉支承于一个具有微小间隙的孔上。
13.
Research on the Instantaneous Clearance and the Plastic Status to the Precise Punching without Burr
精密无飞边冲孔瞬时间隙及塑性状态研究
14.
Investigating the Gap Frequency of a Maize Canopy Using Night TIR Data
利用夜间热红外数据求取玉米冠层孔隙率
15.
Pore size evolution of granular ore media during heap leaching
堆浸过程中矿岩散体粒间孔隙尺寸的演化规律
16.
Gap Flow Research for Deep-Small Hole Drilling by EDM Based on Fluent Software
基于Fluent电火花深小孔加工间隙流场的研究
17.
STUDY ON THE STRUCTURE WITHIN RESERVOIR PORE SPACE OF THE DOLOMITE,Qiang-D2-Well
羌D2井白云岩储集层孔隙空间结构研究
18.
For intergranular materials, poorly to moderately well cemented, the total porosity is approximately equal to the effective porosity.
对于由晶体构成的物质，其晶粒间含泥浆少或较少，因此总孔隙度与有效孔隙度近似相等。