1.
The Study of Vehicle Location Display System Based on Embedded GIS;
基于嵌入式GIS的车辆定位显示系统研究
2.
colour radiolocation
无线电定位彩色显示
3.
azimuth-stabilized PPI
方位稳定平面位置显示器
4.
Move selected image up in display order
上移选定图像在显示顺序中的位置
5.
What placeholder character do you want the field to display?
请指定该字段中所需显示的占位符:
6.
Determines whether this dialog displays a prompt for the customer's organization.
确定该对话框是否显示客户单位的提示信息。
7.
Specifies if the century is displayed as four or two digits.
指定公元年份是显示为四位数还是两位数。
8.
"The list below displays the locations you have specified. Select the location from which you are dialing.
"下列显示了您指定的位置。选择您拨号的位置。
9.
In computer graphics, a predefined display image that defines the locations and characteristics of display fields on a display surface.
在计算机图形学中，预先定义的显示图象，它规定显示面上的显示域的位置和特性。
10.
Positioning Detection and Real-time Display Device Used in ELISA Tests
ELISA测定中的定位检测及实时状态显示装置
11.
To advance the reading or display position according to a prescribed format, for example, to advance the printing or display position horizontally to the right or vertically down.
根据规定的格式，推进读出位置或显示位置，例如横向向右或纵向向下推进打印位置或显示位置。
12.
expanded position indicator display
位置指示器扩大显示
13.
Specifies if the characters entered by a user or placeholder characters are displayed in a TextBox control; specifies the character used as a placeholder.
指定文本框控件内是显示用户输入的字符还是显示占位符；指定用作占位符的字符。
14.
Unable to vertically scroll the displayed image to the specified position.
无法将显示的图像水平滚动到指定位置。
15.
Shows the position, height, and width of the selected control in the status bar
在状态栏中显示选定控件的位置、高度和宽度
16.
Removing those parts of display elements that lie outside of a given boundary.
去掉显示元素中位于给定边界之外的部分。
17.
Conclusion The double widows technique is provied with accuracy and without lack fidelity,and could reflect more condition of peritumour infiltration,it is clear superior to single display technique.
结论 双窗技术在肺部X刀定位中准确 ,明显优于单窗显示技术
18.
The axis display unit must be a numeric value greater than 0 or one of the predefined values in the Display units list.
坐标轴显示单位必须是大于0的数值或者是在“显示单位”列表中预先定义的值之一。