1.
Out-Plane Buckling of Eccentrcally Tensile Members and Tapered Beam-Columns;
拉弯构件及变截面压弯构件弯扭失稳分析
2.
Analysis of Elastic-Plastic Buckling of Component under the Axial Compressive Load and Bending Moment
基于ANSYS压弯构件弹塑性失稳分析
3.
A deformed-status distinguish method for in-plane buckling of symmetrical press-bending arches
对称弯压拱面内失稳类型的变形判断
4.
The act of twisting or turning.
弯曲弯曲或扭转的动作
5.
Numerical Simulation of Wrinkling for Rotary Draw Bending Process of Thin-walled Rectangular Tube;
薄壁矩形管绕弯成形失稳起皱的数值模拟
6.
Analytical Solution of Elastic-Plastic Buckling of an H-shaped Steel Column Wrapped by Carbon Fibre under Axial Compressive Load and Bending Moment
碳纤维增强的H型压弯钢柱弹塑性失稳分析
7.
The child twisted the wire.
孩子把铁丝扭弯了。
8.
This wire twists easily.
这条铁丝容易扭弯。
9.
Too much force will twist the key.
用力过猛会把钥匙扭弯。
10.
fatigue testing machine for alternating torsion
交弯扭转疲劳试验机
11.
turned or twisted toward one side.
朝一边扭转或弯曲的。
12.
The condition of being twisted or turned.
扭曲被弯曲或扭转后所处的状态
13.
It is bent and twisted into the shape of a skew curve.
它被扭弯成一条扭曲的曲线。
14.
The results show that improving the rolling velocity and reducing the galvanizing time will result in reduction of strength loss after galvanizing, and increase of bend torsion valve, thus productivity is improved.
结果表明：提高收线速度，减少浸锌时间，镀后强度损失减小，弯扭值提高，生产效率提高。
15.
On the influence of the bending moment waveform disturbance on the pure bending beam flexion
弯矩波形扰动对纯弯梁弯扭屈曲的影响
16.
Numerical Simulation of Wrinkling Onset during the NC Bending Process of Thin-walled Tube;
薄壁管数控弯曲成形过程失稳起皱的数值模拟研究
17.
Research on Wrinkling and Parameter Optimization of Strip Metal In-Plane Bending under Unequal Compressing;
板带不均匀压下面内弯曲过程失稳起皱与参数优化的研究
18.
Research on Wrinkling and Forming Limit of NC Bending Process of Thin-Walled Tube;
薄壁管数控弯曲成形过程失稳起皱及成形极限的研究