1.
crankshaft journal face hardening machine
曲轴轴颈表面淬火机床
2.
crankshaft journal milling machine
曲轴轴颈铣削专用机床
3.
"If the bearings seem to have worn fairly uniformly, then the chances are that only crankshaft-journal checks and bearing replacement will be required."
如果轴承看上去似乎已磨损的相当均匀,那么只需要检查曲轴轴颈并更换轴承。
4.
Wearing of crankshaft journals and crankpin is one of the most key indexes for evaluating the working life of internal combustion engine.
内燃机曲轴轴颈的磨损量是衡量内燃机寿命的一个重要指标。
5.
crankshaft (main journal turning lathe)
曲轴（主轴颈）车床
6.
Crankshaft main journal out of round or worn
曲轴主轴颈不圆或磨损
7.
Replace crankshaft or grind journals
更换曲轴或磨光轴颈
8.
Crankshaft Journal Size Paint Location
曲轴颈部尺寸标记位置
9.
MAIN BEARING JOURNAL DIAMETER (CRANKSHAFT REMOVED)
主轴承颈部直径（曲轴已卸去）
10.
camshaft(journal )turning lathe
凸轮轴（轴颈）车床
11.
Bearing Clearance (#1 Journal)
轴承间隙（#1轴颈）
12.
The influence of the journal misalignment in bearing bore resulted from crankshaft deformation when it acted by load should be considered in the lubrication analysis of crankshaft bearing.
曲轴轴承的润滑分析应该考虑曲轴受载变形导致轴颈在轴承孔中倾斜的影响；
13.
Programming of Inner-milling of Crankshaft Drive Spindle with Parameters R
基于R参数的曲轴主轴颈内铣加工循环编程
14.
The Influence Analysis on Precision of Press Caused by the Diameter Deviation of the Crank Supporting Neck
曲轴支承颈的轴径误差对压力机精度影响分析
15.
upper center crankshaft bearing
曲轴主轴承上中轴瓦
16.
Remove piston and connecting rods from crankshaft journals.
从曲轴颈上拆下活塞和连杆。
17.
Innovations Of The Mechanical Processing Techniques Of The Main Journal Of G6135Z Crankshaft;
G6135Z曲轴主颈机加工工艺改进
18.
In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.
在发动机里，机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上。