1.
The ultimate longitudinal strength of container ships was analyzed by a simplified method.
用简化方法对集装箱船进行了垂向弯矩和水平弯矩联合作用下的极限强度分析。
2.
Only through control of roll moments could a pilot maintain a level trajectory or dip a wing into a smooth banking turn.
飞行员必须控制滚转力矩，才能维持水平飞行，或将一侧机翼向下压，做出平顺的倾斜转弯动作。
3.
The concrete wall is suffered with horizontal shear force and moment in the plane of the wall.
通常钢筋混凝土墙主要用于承受水平剪力作用及承受墙平面内的弯矩作用。
4.
horizontally bent comb monochromator
水平弯曲中子梳单色仪
5.
moment to change trimcm.
每厘米吃水差校平力矩
6.
Experimental Verification on the Calculation of the Castellated Beam-Columns′ Stability and Carrying Capacity in Plane
蜂窝式压弯构件弯矩作用平面内稳定承载力计算的试验验证
7.
DISCUSSION ABOUT MOMENT MODULATION COEFFICIENT OF ULTIMATE EQUIVALENT LOAD BALANCE METHOD
极限等效荷载平衡法弯矩调幅系数探讨
8.
Bending of thick rectangular plates with adjacent simply supported andtwo-fixed edges under hydrostatic pressure;
复杂边界厚矩形板在静水压力作用下的弯曲
9.
Applying RTM to Resolve the Bending of Thick Rectangular Plates under Hydrostatic Pressure;
功的互等法解静水压力作用下厚矩形板的弯曲
10.
Bending of thick rectangular plates with adjacent simply supported,one fixed and one free edges under hydrostatic pressure
静水压力作用下复合边界条件厚矩形板的弯曲
11.
Experimental Research on Behavior of Flush End-plate Composite Joints under Positive Moment;
正弯矩作用下平齐式端板连接组合节点的试验研究
12.
The Study on In-Plane Equivalent Bending Moment Coefficient of Tapered Portal-Frame-Column without Brace
无侧移楔形变截面门式刚架柱平面内等效弯矩系数研究
13.
Moment-Rotation Models of Semi-Rigid Composite Beam-To-Column Joints with Flush End Plate Connection
平端板连接半刚性梁柱组合节点的弯矩-转角模型
14.
Non-linear analysis on cast tubular T-joints loaded by out-plane bending
平面外弯矩作用下的T形铸钢节点承载力非线性分析
15.
Is Base Elbow Installed Level?
基座弯头是否安装在水平位置
16.
Mechanical model and analysis of casing bucking in horizontal wells
水平井套管弯曲力学模型与计算分析
17.
Bending for the Thick Rectangular Plates under Hydrostatic Pressure and Its Engineering Application;
静水压力作用下厚矩形板的弯曲问题及其工程应用
18.
The beams are designed with respect to the bending moment.
梁是按照弯矩设计的。