1.
A REASONABLE MODIFICATION FOR LADE COLLAPSE YIELD MODEL
Lade体积屈服面模型的合理修正
2.
Implementation and verification of HISS model in ABAQUS
分级单屈服面模型在ABAQUS中的实现及验证
3.
The Mathematical and Mechanical Foundation of Generalized Plastic Mechanic and a Three Yield Surface Model for Soil;
广义塑性力学数学力学基础及一个土体的三屈服面模型
4.
A DOUBLE-YIELD SURFACE MODEL WITH REVISED PLASTIC WORK AS HARDENING PARAMETER AND ITS APPLICATION
采用修正塑性功硬化参数的双屈服面模型及应用
5.
Stress-strain analyses of sand-EPS lightweight-bead fills based on elliptic-parabolic yield surfaces model
基于椭圆–抛物双屈服面模型的砂–聚苯乙烯颗粒轻质填料应力应变分析
6.
The 3D Seismic Response Analysis of Metro Turnel Based on Multi-yield Surface Dynamic Constitutive Model;
基于多屈服面动本构模型的地铁车站三维地震响应分析
7.
The Seismic Response Study on Metro Tunnel Based on Multi-yield Surface Dynamic Constitutive Model;
基于多屈服面动本构模型的地铁结构地震响应分析
8.
Numerical modeling for sand′s double yield surfaces under stress path with increasing p
增p路径下砂土双屈服面的数值建模方法
9.
EXPERIMENT AND MODELING STUDY OF AGED ALU-MINIUM ALLOYS STRENGTHENING RESPONSE
铝合金时效-屈服强度的实验与模型化研究
10.
Development of a Yield-Line Model for Endplate Connections in Fire
火灾中端板连接件的屈服线模型的研究进展
11.
A plastic constitutive model for concrete with zero value of initial yield stress under triaxial compressive loading condition
零屈服应力下混凝土三轴受压塑性模型
12.
Mechanical model for pile-driving is presented according to the soil deformation behavior and yielding criterion of structural soft soils.
根据结构性土体的变形特征和屈服准则，建立打桩力学模型。
13.
The output parameters of the model are three mechanical properties namely ultimate tensile strength (UTS), yield strength (YS) and elongation (ELO).
模型的输出为三个力学性能指标,即抗拉强度、屈服强度和延伸率。
14.
A Model for Age Strengthening of Al Alloys with Plate/Disc-like or Rod/Needle-like Precipitate
具有盘/片状,棒/针状析出相铝合金的时效-屈服强度变化模型
15.
Yield will spread from the outer fibers inward until the two zones of yield meet.
屈服从外面纤维向里扩展，直到这二个屈服区相交为止。
16.
We shall never bend before difficulties.
我们决不会在困难面前屈服。
17.
It was unseemly to yield to such pressure.
要是屈服于这种压力，那是不体面的。
18.
The conventional photoelastic modes and procedures suffice to indicate whether or not the yield point of the material of the prototype will be exceeded.
常用的光弹性模型和方法能够指明原型材料的屈服点是否将被超过。