1.
Nonlinear FEM Analysis on SRC Joints and Application of Composite Reinforcement Technique;
型钢混凝土节点非线性有限元分析与组合加固技术应用
2.
Study on Heating and Solidification Microstructure of Upset AZ91D Mg Alloy in the Semi-solid State;
压缩形变AZ91D镁合金半固态加热及凝固组织研究
3.
The Tiny View Organization of Al-Cu Alloy by Semi-Solid Processing;
半固态加工Al-Cu合金的微观组织
4.
EXPERIMENTAL STUDY ON THE STRENGTHENED COMPOSITE BEAM JOINTED WITH WELDED SHORT REBAR
焊接短筋连接的加固组合梁试验研究
5.
Study on Subsidiary Stir and Solidification Structure of Semi-solid Magnesium Alloy Prepared by Solid State Reheated;
固态二次加热制备半固态镁合金浆料辅助搅拌及其凝固组织研究
6.
Discussion on Optimal Parameters Combination of Arching System Based on Composite Main Arch Circle Method
基于复合主拱圈加固拱桥技术中锚固系统最佳参数组合探讨
7.
The Research on Microstructure and Property of Al-Cu Alloy by Semi-Solid Processing;
半固态加工Al-Cu合金的组织及性能的研究
8.
The Analysis of the Damage of the Exiting Combined Truss Arch Bridge and Study on Its Strengthening;
既有桁式组合拱桥病害分析及维修加固研究
9.
The Applied Research of the Stake Net Dual Combination in the Reinforcing Soft Base;
桩网二元组合在加固软基中的应用研究
10.
Reheated microstructures of semi-solid ingots of TiC_p/7075Al composites
TiC_p/7075Al基复合材料半固态坯料二次加热组织
11.
THE RESEARCH FOR THE APPLICATION OF STEEL-CONCRETE COMPOSITE GIRDERS IN THE REINFORCEMENT OF INDUSTRIAL PLANTS
钢与砼组合梁加固工业厂房的应用研究
12.
Study on Mechanical Behavior of Concrete Beam Strengthened with Shaped-steel
型钢加固钢筋混凝土组合梁的性能研究
13.
Comparative Analysis of Four Kinds of Strengthening Methods for Composite Trussed Arch Bridges
桁式组合拱桥4种加固方法的对比分析
14.
Microstructure Evolution of Cu-12.58%Mg Hypereutectic Alloy at Constant and Abruptly Increasing Velocities in Directional Solidification
定向凝固恒速和跃迁加速下Cu-12.58%Mg过共晶合金的凝固组织演变
15.
Practical Retrofitting Case Study on Composite Beam by Adding H-type Steel Member under the Concrete Beam;
后加下托H型钢—混凝土组合梁的工程加固实例研究
16.
Interfacial Shear Stress Calculation During Reinforcing Steel-Concrete Composite Girders with Prestressed CFRP Sheets
施加预应力阶段CFRP布加固组合梁界面剪应力计算
17.
Research on the Directionally Solidified Microstructures Evolution of Ni-10.6%NbC Eutectic Alloy at Constant and Changing Growth Rates;
Ni-10.6％NbC共晶合金恒速和跃迁加速定向凝固下的组织演化研究
18.
Research on Influence of Rare Earth Addition and Solid Solution Treatment to the Microstructure and Mechanical Properties of AM60 Magnesium Alloy;
稀土添加及固溶处理对AM60镁合金组织及力学性能的影响