1.
Research of Dynamics Model and Solution on Mechanism with Clearance;
含间隙机构的动力学建模与求解方法研究
2.
Stability Analysis of Flapping-wing Mechanism with Bearing Clearance
含间隙的翅翼机构运动稳定性的研究
3.
Dynamics numerical analysis of space deployable mechanism with three-dimensional clearance revolute joint
含三维间隙铰空间可展机构动力学数值分析
4.
Optimization Design for Mechanical Accuracy of High Speed Press with Clearance
含间隙高速压力机机构的精度优化设计
5.
The Assur Groups Method of Analyzing Transition Process of Planar Linkage with Pair Clearances
用杆组法分析含间隙平面连杆机构的过渡过程
6.
Dynamic research of diaphragm's slider-crank mechanism with clearance
含间隙隔膜泵曲柄滑块机构动力学研究
7.
The Assur Groups Method of Kinematic Analysis of Planar Linkage with Pair Clearances (1) The mathematical model of the basic second grade Assur Groups with pair clerance
含间隙平面连杆机构运动分析的杆组法──(1)求解含间隙基本二级杆组的数学模型
8.
Dynamics Simulation of A Crank-Slider Mechanism With A Clearance-Joint by Virtual Prototype;
基于虚拟样机技术的含间隙铰曲柄滑块机构动力学仿真研究
9.
Research on dynamic error of high speed forcing press with clearance
含间隙高速压力机机构的动态误差传递规律研究
10.
Anylysis and Synthesis of Elastic Linkages with Joint Clearances Based on Robust Design;
基于稳健设计的含间隙弹性连杆机构分析与综合
11.
Analysis of the Oscillation and Turbulence Process of the Four-bar Beating-up Mechanism with Motion Dual Clearance;
含运动副间隙的四杆打纬机构振动和涡动过程分析
12.
Dynamic Simulation of a Four Bar Mechanism with Clearance in Linkage-Rocker Joint based On Virtual Prototyping Technology;
含连杆摇杆运动副间隙四杆机构动力学仿真研究
13.
Exciting Force Effect Research for Mechanism Space on Internal-combustion Engine
机构间隙对内燃机激振力影响的研究
14.
STABILITY ANALYSIS OF PLANAR FOUR BAR LINKAGES WITH CLEARANCES
考虑间隙的平面四杆机构稳定性分析
15.
Hybrid model-predictive-control for mechanical system with backlash
含间隙机械系统的混杂模型预测控制器
16.
Dynamic Simulation and Modeling of Planar Revolute Joint with Clearance Based on Virtual Prototyping
基于虚拟样机技术的含间隙转动铰建模方法
17.
Possessing a speed blades gap adjustingdevice, permit to adjust steplessly the blades gap.
刀片间隙快速调整机构，可对刀口间隙进行无级调整。
18.
Hydraulic Valve Lash Adjuster (HLA) and Valve Train with HLA
液压气门间隙调节器及有间隙调节器的气门机构的研究