1.
Analytic Method for Determining Basic Circle Radius of Constant Speed Moving Follower;
解析法确定从动件为等速运动规律的凸轮基圆半径
2.
DETERMING THE MINIMAL RADIUS OF BASE CIRCLE OF A CAM WITH TRANSLETINGA POINT FOLLOWER ACCORING TO THE ALLOWABLE PRESSURE ANGLE[α]
按许用压力角(α)确定直动从动件盘形凸轮机构凸轮最小基圆半径
3.
A Reasonsbale Methord to Decide the Basic Circle s Radius Of the Cam;
一种合理确定凸轮机构基圆半径的方法
4.
Defining Minimum Base Radius of Plate Cam for Oscillating Follower by 0.618 Optimization Method
0.618法最优确定盘状摆动凸轮机构的最小基圆半径
5.
The radius of a circle described by a crank, cam, or similar machine part.
(曲轴的)半径曲柄、凸轮或类似机器部件形成的圆的半径
6.
Calculation of Pressure Angle and Minimun Average Cylinder Radius of Cylindrical Cam Mechanisms with Oscillating Roller Follower by Using Instantaneous-center Method
用瞬心法求滚子摆动从动件圆柱凸轮机构压力角和最小平均圆柱半径
7.
The analysing and calculation of the measurement of cam lift rang effected by the cam base circle eccentricity
凸轮基圆偏心影响凸轮升程测量的分析与计算
8.
Non-equalization Machining Method for Conical Cam with Oscillating Tapered Roller Follower
圆锥滚子摆动从动件圆锥凸轮的非等径加工
9.
Determination of Curvature Radius of Cam Profiles Using Numerical Differentiation
确定凸轮廓线曲率半径的数值微分法
10.
Error Analysis and Cutter Location Control for Unequal Diameter Side Milling of Cylindrical Cam;
非等径侧铣圆柱凸轮误差分析及刀位控制
11.
The Solid Modeling of Disc-type Tool Magazine Based on Cylindrical Index Cam;
基于圆柱分度凸轮圆盘型刀库的实体建模
12.
Study on the influence law of the rolling curve affected by rolling radius during cam shaft cross wedge rolling
楔横轧凸轮轴轧制半径对辊形曲线影响的规律
13.
The Cylinder-CAM Organization s Modeling Assembly and Movement Analysis in Solidworks;
基于Solidworks圆柱凸轮机构的建模装配与运动分析
14.
Technical Design for NC Processing of Spatial Cylindrical Cam NC Machining of Cylindrical Cam Based on MasterCAM
基于MasterCAM软件的圆柱凸轮零件的数控加工
15.
Research on cold forging of spur gears with high boss based on uniform thinking
基于均衡思想高凸台圆柱直齿轮冷锻成形
16.
Digital design of cylindrical end cam based on curve fitting and correction
基于曲线拟合修正的圆柱端面凸轮数字化设计
17.
Solid Modeling and Numerical Control Machining of Sine Groove Cone Cam Based on MasterCAM
基于MasterCAM的圆锥正弦槽凸轮实体造型与数控加工
18.
Design and motion simulation of the cylindrical cam based on Pro/E
基于Pro/E的圆柱凸轮机构设计与运动仿真