1.
On the Methods of the Plane Adjustment of Fitting Frame Lathe Bed Base
框架式床身底座安装水平调整方法的探讨
2.
"Controllers may be supplied with painted steel floor mounting legs. For base mounting or stainless steel mounting legs, consult the Factory."
可提供配置涂漆钢地面安装支架的控制装置。如果需要底座安装或不锈钢安装支架,请工厂联系。
3.
The lathe should be set on a firm base.
车床应安装在坚实的底座上。
4.
The frame or chassis on which panels of electrical equipment may be mounted.
可安装电气设备板的框架或底座。
5.
End-suction centrifugal pumps--Baseplate and installation dimensions
GB/T5660-1985轴向吸入离心泵底座尺寸和安装尺寸
6.
Reinstall the elbow into the base of the relief valve to hold the Air Gap Drain in place.
将弯头安装在安全阀的底座，将气隙排放装置固定住。
7.
accessory drive pad
附件传动装置安装座
8.
Plain Bearing Block Housings are made up of cap, base ,aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦（铝青铜），安装螺栓组成，主要承受径向载荷。
9.
Tubes are generally mounted on truck-trailer chassis or railroad car beds, or placed at stationary locations when large amounts of nitrogen are needed.
管道一般是安装在拖车底盘或有轨车底座上，或者当需要大量氮时放置在固定位置。
10.
Tubes are generally mounted on a truck-trailer chassis or railcar bed, or placed at stationary locations when large amounts of oxygen are needed.
管道一般是安装在拖车底盘或有轨车底座上，或者当需要大量氧时放置在固定位置。
11.
Install the seatback in the vehicle.
在车辆里安装座椅背。
12.
bottom mount drawer slide
底部安装的抽屉滑道
13.
cradle mounted fuel injection pump
弧形底安装式喷油泵
14.
Air conditioner wind outlets are equipped under every seat, which can make the air current of the whole theatre evener and more comfortable.
每一个座位底下都安装了一个空调出风口，可以使整个剧场的气流更加均匀舒适。
15.
Soleplate which is adjustable slightly is installed on the speed reducer and bearing seat. The soleplate is easy installed and lower noise.
减速机和前、后轴承座，均设有可上下、左右微调的底板，安装、拆卸调试方便，噪音小。
16.
seat with integral seat belt anchorages
设有原装安全带固定装置的座位
17.
Install the seat/shoulder belt anchor bolt.
安装座椅/安全肩带系紧螺栓。
18.
Install screws attaching seat function switch to seat trim panel.
安装连接座椅功能开关至座椅饰板的螺钉。