说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 渗碳温度
1.
Influence of plasma carburizing temperature on microstructure and properties of carburized layer for AISI 316L stainless steel
离子渗碳温度对316L不锈钢渗层组织和性能的影响
2.
Model for the distribution of carburized case depth of spur gear in warm forming after car burizing
直齿轮“渗碳-温挤”渗碳层厚度分布模型
3.
Research on Solid-state Infiltrated B_4C for TC4 at Different Temperatures
TC4在不同温度下固态渗碳化硼研究
4.
The heat treatment technology of carbo- nitriding of steel has the characteristic of lower treatment temperature and direct quenching.
钢的碳氮共渗热处理工艺具有共渗温度低、直接淬火等特点。
5.
INVESTIGATION OF THE ACCURATE CONTROL ABOUTSURFACE CARBON CONCENTRATION OF CARBURISING PART
渗碳零件表面碳浓度精确控制的探讨
6.
Study on the High Temperature Oxidation Resistance and Carbonization Resistance of Diffusion Aluminized Stainless Steel;
扩散渗铝不锈钢的抗高温氧化和抗渗碳性研究
7.
Research of Middle Temperature Chromizing on Carbon Steel with Double Glow Plasma Surface Alloying Process and Carbon Migration in the Chromized Layer;
碳钢表面中温双辉等离子渗铬合金化及渗层中碳迁移的研究
8.
Sim? ilarly, an increase in case depth, particularly uneven case depth in case hardening steels, increases warpage on quenching.
与此类似,渗碳层厚度越大,特别是对于渗碳层厚度不一的渗碳用钢,淬火时更易产生翘曲。
9.
Influence of nitrocarburizing on microstructure and roughness of 4Cr10Si2Mo steel
氮碳共渗对4Cr10Si2Mo钢渗层组织和表面粗糙度的影响
10.
Measurement on the carbonizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T9095-1988烧结铁基材料渗碳或碳氮共渗硬化层深度的测定
11.
Simulation Study on Fluidized Bed Carburizing Layer Depth Mathematic Model
流态化渗碳层深度数学模型仿真研究
12.
Gas Carburization Characteristics of Sub-micron Structure on Fe Surface at Low Temperature;
铁表面亚微米结构的低温气体渗碳特性
13.
Infiltrating-carbon Furnace Temperature Control System on the Basis of Fuzzy PID Control;
基于模糊PID控制的渗碳炉温控系统研究
14.
Effect of Austerpering After Carburizing on Microstructure and Property of 18Cr2Ni4WA
18Cr2Ni4WA渗碳后等温淬火对组织与性能的影响
15.
Optimization Technological Parameters for Hot Dip Aluminizing and Diffusion Aluminizing and High Temperature Oxidation Properties on Surface of Carbon Steel
碳钢热浸扩散渗铝工艺及高温氧化性能的研究
16.
Brightening Treatment of Austenite Stainless Steel after Plasma Carburizing
奥氏体不锈钢低温离子渗碳后的亮化处理
17.
A Study on Leachate Transport of MSW Landfill under Coupled Temperature-Seepage Action;
生活垃圾渗滤液运移的温度—渗流耦合作用研究
18.
Influence of temperature on fluid seepage rule of Xifeng exrta-low permeability reservoir
温度对西峰特低渗油藏流体渗流特征影响